Digital Security Controls Ltd. 05SKY 사용자 설명서
5
Section 4 - What Do I Do before Installing a Skyroute Transceiver?
CONNECT 24 is your Skyroute Cellemetry service provider.
If you have not yet enrolled as a Skyroute dealer, you must do so at least 1 business day before your first Skyroute installation.
NOTE: If you do not have the numbers required below, please call Connect 24 at 1-888-955-5583 in Canada or 1-888-251-7458
in the U.S. “Dealer Enrolment”.
in the U.S. “Dealer Enrolment”.
Activation of your Skyroute transmitter can be accomplished in minutes, at any time 24 hours a day, 365 days a year, by calling our toll-free CON-
NECT 24 Voice Response Unit at 877-759-7688 (Canada) or 888-251-7554 (U.S.). This guide will provide you with an example of what to
expect when you are using the VRU.
NECT 24 Voice Response Unit at 877-759-7688 (Canada) or 888-251-7554 (U.S.). This guide will provide you with an example of what to
expect when you are using the VRU.
Before you begin, make sure you have all of the information that you will need to enter into the VRU system.
What you will need…
• The Profile Number for your installation
The Profile Number represents the Central Station Receiver/Rate Plan
combination and the communication format you are using. Make sure
that you know which profile number to use when doing an installation.
combination and the communication format you are using. Make sure
that you know which profile number to use when doing an installation.
• Your Installer ID Number
Each individual installer who was listed on your Dealer Enrolment Form
was given a unique Installer ID Number. This number can be found on
the Authorized Installer Card sent with the Dealer Confirmation Form.
was given a unique Installer ID Number. This number can be found on
the Authorized Installer Card sent with the Dealer Confirmation Form.
• Your Installer PIN
Each installer is provided a four digit Personal Identification Number
(PIN) on the Dealer Enrolment Form. If you have forgotten your PIN,
please contact CONNECT 24.
(PIN) on the Dealer Enrolment Form. If you have forgotten your PIN,
please contact CONNECT 24.
• The Central Station Account Number for the alarm system
This is the account number you wish to be transmitted to the central sta-
tion. If the profile is set to send SIA format, enter a maximum of six dig-
its; if Contact ID format, enter a maximum of four digits.
tion. If the profile is set to send SIA format, enter a maximum of six dig-
its; if Contact ID format, enter a maximum of four digits.
• The Skyroute MIN (Mobile Identification Number)
The MIN identifies the Skyroute transmitter. The 10-digit MIN is
located on the label affixed to your Skyroute transmitter.
located on the label affixed to your Skyroute transmitter.
• The System ID Number (SID) for the cellular provider in your area
The five-digit System ID Number tells CONNECT 24 (and the cellular
network) the home area in which your transmitter is installed. When you
program this number into the DSC alarm panel, it is entered in HEX for-
mat. However, when entering this number into the CONNECT 24 VRU,
it is entered in DECIMAL format.
network) the home area in which your transmitter is installed. When you
program this number into the DSC alarm panel, it is entered in HEX for-
mat. However, when entering this number into the CONNECT 24 VRU,
it is entered in DECIMAL format.
NOTE: For US locations, please refer to the “U.S.A SID List -
By State” document which comes with each Skyroute trans-
ceiver as a separate booklet.
By State” document which comes with each Skyroute trans-
ceiver as a separate booklet.