Digital Security Controls Ltd. 12TR5164 사용자 설명서

3. Enter programming section [141] to [156] for wireless keys 1-16.

4. For each of the available buttons on the wireless key, enter the 2-digit number corresponding to the 

selected function. See “Wireless Key Function Key Options” on page

options.

5. Record all programming choices in the worksheets in the back of the manual.

6. To exit press [#].

For more information on programming wireless key function buttons, refer to the wireless key 

installation sheet.

Returning the TR5164 programming to factory default settings removes all enrolled devices from the 

system and resets programming in section [804]. 

NOTE: Performing this procedure does not reset any other programming sections on the control 

panel. Likewise, resetting the control panel to factory defaults does not effect TR5164 

programming.

To reset TR5164 programming to factory default settings:

1. Enter [

,

][8] [Installer Code].

2. Enter programming section [996].

3. Enter the Installer Code, followed by [996] again. The software for the TR5164 is reset to factory 

defaults.

4. To continue programming the unit, exit and then re-enter Installer Programming by pressing [#] 

[

,

][8] [Installer Code].

For instructions on resetting the control panel or any other connected module to factory defaults, see the 

control panel Installation Manual. 

DRAFT