Digital Security Controls Ltd. 15TL2553GRE 사용자 설명서
[012] DLS Incoming Port
Default (0BF6/3062)
The DLS Incoming Local Port (listening port) is the port DLS IV will use when connecting to the Communicator. If a router or
gateway is used, it must be programmed with a Transmission Control Protocol (TCP) port forward for this port to the Com-
municator module IP address. Valid range: 0000 - FFFF.
Default (0BF6/3062)
The DLS Incoming Local Port (listening port) is the port DLS IV will use when connecting to the Communicator. If a router or
gateway is used, it must be programmed with a Transmission Control Protocol (TCP) port forward for this port to the Com-
municator module IP address. Valid range: 0000 - FFFF.
[013] DLS Outgoing Port
Default (0BFA/3066)
The DLS Outgoing Port is used for outgoing session to DLS IV after an SMS request has been sent to the Communicator. Use
this Section to set the value of the local outgoing port. The value must be changed if the Communicator is located behind a fire-
wall and must be assigned a particular port number, as determined by your network administrator. In most cases, changing the
default value or configuring your firewall with this port is not required.
Valid range: 0000-FFFF.
NOTE: If Section [006] Toggle Option [7] is ON, DLS will use the Primary path for session. If Section [006] Toggle Option [7] is
Default (0BFA/3066)
The DLS Outgoing Port is used for outgoing session to DLS IV after an SMS request has been sent to the Communicator. Use
this Section to set the value of the local outgoing port. The value must be changed if the Communicator is located behind a fire-
wall and must be assigned a particular port number, as determined by your network administrator. In most cases, changing the
default value or configuring your firewall with this port is not required.
Valid range: 0000-FFFF.
NOTE: If Section [006] Toggle Option [7] is ON, DLS will use the Primary path for session. If Section [006] Toggle Option [7] is
OFF DLS will use the Ethernet path, if available.
[020] Time Zone
Default (00)
Use Column 2 (Offset Hours) to find your local Time Zone. Record the two digit HEX value from Column 1 (HEX Value) on the
same row. Program this HEX value for your Time Zone. Valid range is 00 - FF.
Default (00)
Use Column 2 (Offset Hours) to find your local Time Zone. Record the two digit HEX value from Column 1 (HEX Value) on the
same row. Program this HEX value for your Time Zone. Valid range is 00 - FF.
Table 8: World Wide Time Zones
HEX
Value
Offset
Hours
Standard
Abbreviation
Location
01
-12
BIT
Baker Island Time
05
-11
SST
Somoa Standard Time
09
-10
HAST
Hawaii-Aleutian Standard Time
0B
-9.5
MIT
Marquesas Island Time
0D
-9
AKST
Alaska Standard Time
11
-8
PST
Pacific Standard Time
15
-7
MST
Mountain Standard Time
19
-6
CST
Central Standard Time
1D
-5
EST
Eastern Standard Time
1F
-4.5
VST
Venezuela Standard Time
21
-4
AST
Atlantic Standard Time
23
-3.5
NST
Newfoundland Standard Time
25
-3
ART
Argentina Time
29
-2
BEST
Brazil Eastern Standard Time
2D
-1
CVT
Cape Verde Time
31
0
GMT
Greenwich Mean Time (UTC)
35
1
CET
Central European Time
39
2
SAST
South Africa Standard Time
3D
3
AST
Arabic Standard Time
3F
3.5
IRST
Iran Standard Time
41
4
GST
Gulf Standard Time
43
4.5
AFT
Afghanistan Time
45
5
PKT
Pakistan Time
47
5.5
IST
Indian Standard Time
48
5.75
NPT
Nepal Time
49
6
VOST
Vostok Time
4B
6.5
MMT
Myanmar Time
15