Digital Security Controls Ltd. 15TL2553GRE 사용자 설명서

Ethernet Cellular Programming

Worksheets

System Options

[001] Ethernet IP Address
Default (000.000.000.000)

[002] Ethernet IP Subnet Mask
Default (255.255.255.000)

[003] Ethernet Gateway IP Address
Default (000.000.000.000)

[004] Receiver Supervision Interval
Default (0087/135) Valid range: 0000 - FFFF.

[005] System Toggle Options

[1] Ethernet Receiver 1 Supervised Default (OFF).

[2] Cellular Receiver 1 Supervised Default (OFF).

[3] Supervision Type Default (OFF).

[4] Primary Communications Path.

Default [OFF] TL2553G(R)-E; [ON] 3G2055(R)-E.

[5] Redundant Communications Default (OFF).

[6] Remote Firmware Upgrade Default (ON).

[7] Alternate Test Transmission Default (OFF).

[8] Cellular Low Signal Trouble Default (OFF).

[006] System Toggle Options 2

[1] Ethernet Receiver 1 Enabled Default (ON).

[2] Ethernet Receiver 2 Enabled Default (ON).

[4] Cellular Receiver 1 Enabled Default (ON).

[5] Cellular Receiver 2 Enabled Default (ON).

[7] DLS Over Cellular Default (ON).

[8] Interactive Over Cellular Default (ON).

[007] DNS Server IP 1

Programming not permitted on UL/ULC listed system.

Default (000.000.000.000)

[008] DNS Server IP 2

Programming not permitted on UL/ULC listed system.

Default (000.000.000.000)

Programming Options

[010] System Toggle Options 3

[1] Enable 2-way audio over 3G

[011] Installer Code
Default (CAFE) Valid range: 0000 - FFFF.

[012] DLS Incoming Port
Default (0BF6/3062) Valid range: 0000 - FFFF.

[013] DLS Outgoing Port
Default (0BFA/3066) Valid range: 0000 - FFFF.

[020] Time Zone
Default (00) Valid range: 00 - 99.

[021] Account Code
Default (FFFFFF) Valid range: 000001 - FFFFFE.

[022] Communications Format
Default (04) Program 03 (CID), 04 (SIA).

[023] Panel Absent Trouble
Default (FF); Program 00 disable or FF enable.

[024] Panel Absent Trouble Restore
Default (FF) Program 00 disable or FF enable.

[025] Radio Activation Restore
Default (FF) Program 00 disable or FF enable.

System Test Options

[026] Ethernet 1 Transmission
Default (FF) Program 00 disable or FF enable.

[027] Ethernet 2 Transmission
Default (00) Program 00 disable or FF enable.

[028] Cellular 1 Transmission
Default (FF) Program 00 disable or FF enable.

[029] Cellular 2 Transmission
Default (00) Program 00 disable or FF enable.

[030] FTC Restore
Default (FF) Program 00 disable or FF enable.

[031] Priority Tamper Alarm
Default (FF) Program 00 disable or FF enable.