ADC Telecommunications Inc. PRSMAW4A 사용자 설명서
Managing Host Units
Page 222
FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc
ADCP-77-073
• Issue 2 • 11/2009
9.5
V
IEWING THE
H
OST
S
E
RF S
UMMARY
The
Host SERF
page provides a summary for the SeRF (Serial Radio Frequency) card
located in the Host. The Host SeRF card contains the processor chip where the EMS
software documented in this manual resides. The SeRF controls communication
between the Host and the Remotes, and maintains the system configuration settings.
software documented in this manual resides. The SeRF controls communication
between the Host and the Remotes, and maintains the system configuration settings.
In the Function Explorer Tree, select
System View
,
Host-
x
,
SERF
(where
-
x
is the Host
name) to open the
Prism on SERF of Host
-n view in the EMS View Frame.
The
Prism on SERF of Host
-n view has the following elements:
•
Optical Ports
—alarm status indicator for Host optical ports. Red indicates that an
alarm exists for at least one of the eight optical ports on the SeRF card. Yellow
indicates a minor alarm.
indicates a minor alarm.
•
SERF Fault
—state of the SeRF. Red indicates that either the SeRF clock source is
unacceptable or the SeRF card FPGA is not programmed.
•
System Fan Fault
—state of the Host chassis fan. Red indicates that the Host chassis
fan is spinning too slowly.