ADC Telecommunications Inc. PRSMAW4A 사용자 설명서
SNMP Interface
Page 292
FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc
ADCP-77-073
• Issue 2 • 11/2009
12.6
F
LEX
W
AVE
-URH A
GENT
MIB
Objects in the FlexWave-URH Agent MIB divide into two types:
GET
/
SET
objects and
trap objects. This section describes the
GET
/
SET
objects. For information on trap
objects, see
“Traps” on page 308
.
Table 12-2
lists all objects within the FlexWave-URH Agent MIB that are available for
GET and/or SET commands. Objects that are available for SET commands are also
available for
available for
GET commands.
For each SNMP syntax, there is a range of values defined in the MIB file. These are the
possible values that can be entered in a
possible values that can be entered in a
SET command and returned in a GET
command.
You can also
Enable
or
Disable
masking, which sets whether the trap will be raised
(
Disable
) or not (
Enable
). Thresholds dictate when a trap will be activated.
Table 12-2
lists all FlexWave-URH Agent MIB objects for which traps, masks and thresholds are
sent to the SNMP manager.
sent to the SNMP manager.
Table 12-2. FlexWave-URH Agent MIB GET/SET Objects
Object Name
Description
SNMP Syntax
Get
or
SET
or
SET
fwuTrapSequenceNumber
Total number of traps raised
by the agent.
by the agent.
Counter32
GET
fwuTrapTimeStamp
Time stamp when trap was
raised.
raised.
DateAndTime
GET
fwuHstOverTempFaultMask
Show masking status of Over
Temperature fault. Masking
is disabled by default. If
enabled, the trap will not be
raised.
Temperature fault. Masking
is disabled by default. If
enabled, the trap will not be
raised.
MASKType
SET
fwuHstUnderTempFaultMask
Show status of masking of
Under Temperature fault.
Masking is disabled by
default. If enabled, the trap
will not be raised.
Under Temperature fault.
Masking is disabled by
default. If enabled, the trap
will not be raised.
MASKType
SET
fwuHstSERFFPGAStatus
Host SeRF Card FPGA status
where 0 indicates that the
SeRF can talk to the FPGA and
1 indicates that it cannot
where 0 indicates that the
SeRF can talk to the FPGA and
1 indicates that it cannot
INTEGER
GET
fwuHstSysCardRIADCPartNumber
Remote Inventory Data-ADC
Part Number
Part Number
DisplayString
GET
fwuHstSysCardRISerialNumber
Remote Inventory Data-Serial
Number
Number
DisplayString
GET
fwuHstSysCardRIDateCode
Remote Inventory Data-Date
Code
Code
DisplayString
GET
fwuHstSysCardRIHWVer
Remote Inventory
Data-Hardware Version
Data-Hardware Version
DisplayString
GET