Buffalo 000000019 사용자 설명서

다운로드
페이지 64
15
WEP Key 1
WEP Key 2
WEP Key 3
WEP Key 4
Up to 4 WEP keys can be configured. Alphanumeric or hexadecimal WEP keys 
of either 64-bit or 128-bit lengths are supported.
WPA/WPA2 Settings
Encryption Method
Select the encryption method for WPA authentication (TKIP or AES). This 
setting should match that of the access point.
Note: Usually, AES is safer than TKIP. Always use AES for your wireless network 
if it is supported by your devices.
Pre-shared Key
Enter the pre-shared key. This is needed when TKIP or AES is used for 
encryption. Use the same key that your access point and other wireless 
devices are using. Use 8 - 63 alphanumeric or hexadecimal characters. 
Wireless LAN Settings (WPS Settings)
Configure WPS here.
Network - Wireless LAN - WPS Settings
PIN
Displays PIN for WPS connection. Click Generate PIN to generate new PIN.
To connect to the access point, click Execute WPS and enter the PIN to the 
access point within 2 minutes.