Buffalo 000000019 사용자 설명서
48
Case 2: The IP address is invalid.
If print server was assigned an invalid IP address, Settings cannot be accessed. If you cannot open Settings, initialize the
print server, which restores all settings to their factory default values.
print server, which restores all settings to their factory default values.
Print Server Is Not Displayed on LPV4 Port Setup Wizard
Case 1: The IP address is invalid.
If you set the print server’s IP address improperly (such as broadcast address), you cannot access Settings. If you cannot
access Settings, initialize the print server. Note that initialization will restore all settings of the print server to the factory
default.
access Settings, initialize the print server. Note that initialization will restore all settings of the print server to the factory
default.
Case 2: Print server is not connected correctly.
Check the LEDs on the side of the print server. If it is connected correctly, LED is as the following.
For wired connection:
For wireless connection:
Note: If the LAN LED is not lit while an Ethernet cable is connected, check the router and its connection.