Lotek Wireless Inc SRX600 사용자 설명서
. . . . .
C O D E L O G M O D E
1)Config## > 4)Ant/Hydr
Guide to the SRX 600 receiver Rev A #10112
Chapter
5 - - Page 59
U
N D E R S T A N D I N G
A
N T E N N A
G
R O U P S
Antennas can be radio or upconverted hydrophones. However, they are treated as
separate groups by the receiver. For example, in an 8 antenna configuration, if
radio antennas are connected to antenna ports 1,2, 4 and 6 then this is referred to
as the Radio Group. If the rest of the ports available (3, 5, 7 and 8) are upconverted
hydrophones then they are referred to as the Hydrophone Group.
separate groups by the receiver. For example, in an 8 antenna configuration, if
radio antennas are connected to antenna ports 1,2, 4 and 6 then this is referred to
as the Radio Group. If the rest of the ports available (3, 5, 7 and 8) are upconverted
hydrophones then they are referred to as the Hydrophone Group.
If there are no hydrophones used then there is no hydrophone group
(likewise for radio antennas).
(likewise for radio antennas).
A
D D I N G
A N T E N N A S
(
R A D I O
A N D
H Y D R O P H O N E
)
Antennas/hydrophones must be added in the order in which they should be
scanned (scan order). However, the receiver treats the radio antennas as a radio
group and the hydrophones as a hydrophone group (see Understanding Antenna
Groups above for details).
scanned (scan order). However, the receiver treats the radio antennas as a radio
group and the hydrophones as a hydrophone group (see Understanding Antenna
Groups above for details).
For example, the radio group may be connected to antenna ports 1, 2, 4 and 6, but
if they are entered into the receiver in this order: 4, 2, 1 and 6, then that is their
scan order. The same scenario could apply to a hydrophone group.
if they are entered into the receiver in this order: 4, 2, 1 and 6, then that is their
scan order. The same scenario could apply to a hydrophone group.
Add an antenna to a group via Codelog > 1)Config## > 3)Ant or 4)Hydr >
1)Radio Ant Grp
1)Radio Ant Grp
or 1)Acoustic Hydr Grp. The type of antenna must be selected
first, whereby 3)Ant goes to the Radio Antenna Group page and 4)Hydr goes to
the hydrophone group page.
the hydrophone group page.
It is possible to add radio antennas and hydrophones alternately, but it
requires switching back and forth between the radio antenna and
hydrophone pages, which could be time consuming.
requires switching back and forth between the radio antenna and
hydrophone pages, which could be time consuming.
Antennas are added using antenna port numbers and should be entered in the
order that they should be scanned. Available antenna port numbers are from 1
through 8. After each antenna port number is entered, a slash [/] automatically
appears to separate the antennas being entered (e.g. 1/4/5/2/8/6). Press the
ENTER
order that they should be scanned. Available antenna port numbers are from 1
through 8. After each antenna port number is entered, a slash [/] automatically
appears to separate the antennas being entered (e.g. 1/4/5/2/8/6). Press the
ENTER
key to apply the changes (do not press the END/ESC key).