Lotek Wireless Inc SRX600 사용자 설명서
C O D E L O G M O D E
2)Scan > 1)Continue to log data
Guide to the SRX 600 receiver Rev A #10112
Chapter 5 - - Page 76
5
V
I E W I N G
T H E
D
I S P L A Y
S
C R O L L
As valid detections are made they are recorded by the receiver and they are also
available for viewing. Up to 64 valid detections can be accumulated for viewing
during a scan. After 64 initial valid detections have been made the receiver starts
replacing the oldest detection with the most recent and so on (this affects viewing
only).
available for viewing. Up to 64 valid detections can be accumulated for viewing
during a scan. After 64 initial valid detections have been made the receiver starts
replacing the oldest detection with the most recent and so on (this affects viewing
only).
The receiver does not stop collecting data while using this feature.
Access the display scroll via Codelog > 2)Scan > 1)Continue to log data > 2)View
> 1)Display Scroll
> 1)Display Scroll
. To scroll through the detections use the Right and Left Arrow
keys.
C
H A N G I N G
T H E
U N I T S
S E N S O R
D A T A
I S
D I S P L A Y E D
I N
Temperature can be displayed in Celsius (default unit) or Fahrenheit. Pressure can
be displayed in PSI (default unit) or meters. Changing the units for a sensor
affects only the display of the data, it does not affect the data recorded by the
receiver. Data recorded by the receiver is always in the default units (Celsius and
PSI).
be displayed in PSI (default unit) or meters. Changing the units for a sensor
affects only the display of the data, it does not affect the data recorded by the
receiver. Data recorded by the receiver is always in the default units (Celsius and
PSI).
Change the unit for temperature via Codelog > 2)Scan > 1)Continue to log data >
2)View > 2)Temp, pressure units > 1)C/F
2)View > 2)Temp, pressure units > 1)C/F
. The first line in the display updates to
show which unit has been selected (e.g. F).
Change the unit for pressure via Codelog > 2)Scan > 1)Continue to log data >
2)View > 2)Temp, pressure units > 2)PSI/m
2)View > 2)Temp, pressure units > 2)PSI/m
. The first line in the display updates
to show which unit has been selected (e.g. PSI).
C
H A N G I N G
T H E
S
E T
D
E L T A
F
R E Q U E N C Y
When incrementing frequency manually (using the keypad) the receiver uses the
Set Delta frequency increment to advance to the next frequency to scan.
Increments are in kHz.
Set Delta frequency increment to advance to the next frequency to scan.
Increments are in kHz.
Set this increment via Codelog > 2)Scan > 1)Continue to log data > 3)Set Delta >
1)Freq
1)Freq
.