Badger Meter Inc 2010G 사용자 설명서
ORION® SE American® Residential Gas Meter Transmitter
Place four (4) screws into the transmitter
1. Place the four (4) ¼-20 X 3/8" screws through the transmitter and rear gasket from the front.
Figure.11:.Screw.Placement
2. The screws are temporarily held in place by the rear gasket.
Figure.12:.Screws.held.in.place
Gasket Lip
Tab Up
Drain Slots Facing Down and Towards
the Gas Meter
Screws Held in Place
Page 12
(8-10)