Compal Electronics Inc T0022100 사용자 설명서
Chapter 4 Using Your Motion M1200 and M1300 Tablet PCs
Motion Computing M1200 and M1300 Tablet PC User Guide 41
C
LONING
AND
E
XTENDING
Y
OUR
D
ISPLAY
FOR
A
DDITIONAL
V
IEWING
The Tablet PC has a Dual Head Video Controller that allows you to clone the
Tablet PC display or extend it to a second monitor or external device, such as
a projector. Examples of how you might set up your Tablet PC with a clone
(monitor + notebook) versus with an extended desktop are shown below:
Tablet PC display or extend it to a second monitor or external device, such as
a projector. Examples of how you might set up your Tablet PC with a clone
(monitor + notebook) versus with an extended desktop are shown below:
NOTE: When you attach the cables between the Tablet PC and the external
monitor, the external monitor will be blank you change the graphics settings.
However, you cannot change these settings before you attach the cables.
monitor, the external monitor will be blank you change the graphics settings.
However, you cannot change these settings before you attach the cables.
1. Connect the VGA Monitor and Tablet PC
a. Plug the VGA monitor cable into the VGA port on the Tablet PC or
Motion M-Series FlexDock.
Motion M-Series FlexDock.
b. Then, connect the external monitor or data projector to a power outlet
and turn it on. Windows XP will recognize the external monitor or data
projector and search for a driver.
and turn it on. Windows XP will recognize the external monitor or data
projector and search for a driver.
c. If necessary, install the driver from the CD supplied by the monitor’s
manufacturer.
manufacturer.
2. Change the Graphics Settings
For Dual Display Clone
a. Tap the icon for the Intel Extreme Graphics Application in
the System Tray, located in the lower-right corner of the
Tablet PC display.
the System Tray, located in the lower-right corner of the
Tablet PC display.
NOTE: You can also access Graphics through the Motion
Dashboard as well as through the Windows Control panel.
Dashboard as well as through the Windows Control panel.
b. Tap Graphics Options.
c. Tap Output to.
d. Tap Intel(R) Dual Display Clone.