Climax Technology Co Ltd VDP 사용자 설명서
36
8. Network Setting
8.1. Network
The following is displayed when you click on “Network” under the “Network Setting”
option:
option:
Obtain an IP address automatically (DHCP)
If DHCP is selected, the Network will obtain an IP address automatically with a
valid Network DHCP Server. Therefore, manual settings are not required.
This is only to be chosen if your Network environment supports DHCP. It will
automatically generate all information.
valid Network DHCP Server. Therefore, manual settings are not required.
This is only to be chosen if your Network environment supports DHCP. It will
automatically generate all information.
Use following IP address
You can also enter the Network information manually for IP Address, Subnet Mask,
Default Gateway, Default DNS 1 and Default DNS 2.
Default Gateway, Default DNS 1 and Default DNS 2.
DNS Flush Period
You can set the system to clear current DNS resolution records for all entered URL
settings (Reporting, Upload, XMPP…etc.) after a set time period. The system will
then resolve the Domain Name again and acquire new IP address for the URL
settings. This function is disabled by default.
settings (Reporting, Upload, XMPP…etc.) after a set time period. The system will
then resolve the Domain Name again and acquire new IP address for the URL
settings. This function is disabled by default.
Web Server
Set the port used to access
VDP
’s webpage.
VDP
will reset upon changing the web
server port. After reset is complete,
VDP
will switch to using the new port number
when opening its webpage.