Climax Technology Co Ltd VDP 사용자 설명서
12
The wiring should connect to the connector on the inside of bracket, pass through
the opening on the bracket and tucked into the bracket’s central cavity on the back.
the opening on the bracket and tucked into the bracket’s central cavity on the back.
3. The wall mounting bracket has 4 mounting holes. Use the mounting holes as
template, mark mounting location on the wall, drill holes and insert wall plug if
needed.
needed.
4. Screw the mounting bracket onto marked location.
5. Hook VDP onto the bracket. When VDP is hooked on the bracket, the connect come
5. Hook VDP onto the bracket. When VDP is hooked on the bracket, the connect come
in contact with the device and VDP is powered on.
6. Tighten the bottom screw to lock VDP onto bracket.