DTC Communications Inc. T2071 사용자 설명서
7
Antenna Connector
Multi Pin
Connector
Connector
Top View
CONNECTIONS
Microphone
Front View
Channel Select
Switchable
Switchable
ANTENNA (Male MMCX Connector)
This connector accepts the noodle antenna.
MICROPHONE
The Derringer uses an internal electret microphone in addition
to an external microphone
to an external microphone
MULTI-PIN CONNECTOR (Male multi-pin connector)
This connector mates with the 36” external microphone and
also mates with the programming cable and optional vehicular
power adaptor model VPA-2001.
also mates with the programming cable and optional vehicular
power adaptor model VPA-2001.
CHANNEL SELECT SWITCH (Rotary Switch)
The channel select switch allows you to change transmit
channels and is located on the front of the transmitter. It is a
rotary switch which requires the use of the supplied screw-
driver to turn the switching mechanism. Select a transmit
channel number by turning the rotary switch. The configuration
of each channel is managed with DTC programming software.
The programming software included with your Derringer allows
you to assign frequencies, set the deviation, turn ON/OFF
scrambler mode, and turn ON/OFF AGC.
channels and is located on the front of the transmitter. It is a
rotary switch which requires the use of the supplied screw-
driver to turn the switching mechanism. Select a transmit
channel number by turning the rotary switch. The configuration
of each channel is managed with DTC programming software.
The programming software included with your Derringer allows
you to assign frequencies, set the deviation, turn ON/OFF
scrambler mode, and turn ON/OFF AGC.