Seiko Epson Corporation AP003 사용자 설명서
Resetting the System
If operations are unstable, try resetting the system.
Hold down all of the buttons (A/B/C/D).
The screen is reset and the device restarts.
Initialize the device after restarting.
U
“Initializing” on page 26
c
Important:
Measurement data is not recorded if a system reset is performed while measuring.
Measurement data is not recorded if a system reset is performed while measuring.
Note:
❏ Setting data and measurement data remains the same as before the reset was performed.
❏ The following shows the differences between a system reset and initializing. The time needs to be set again for both
❏ The following shows the differences between a system reset and initializing. The time needs to be set again for both
operations.
System reset: The User Settings, Sys. Settings, Mes. Settings, history, stride, HR monitor, and smartphone registration
information all remain as they were before the reset was performed.
information all remain as they were before the reset was performed.
Initialize: The User Settings, Sys. Settings, Mes. Settings, history, stride, HR monitor, and smartphone registration
information are all initialized.
information are all initialized.
SF-710/510/310 User's Guide
Troubleshooting
121