Kintech Co. Ltd PC1021 사용자 설명서
78
After pull out the USB cable, turn on the MID. (Note: if MID is out of charge, it can’t be
turn on. It needs to be charge for a while then turn on.)
NOTE
: 1. If the process isn’t 100%, please don’t disconnect the USB cable during the
updating process because this will cause update failure or possible system failure of the
device.
2. If you accidentally pull out the USB cable or the USB cable Loose during the upgrade
process. You need to pull out the USB cable and then find some small material like needle
and reset the MID then re-upgrade.
3. If the computer installed the tool before, you can click the icon “
”
to enter
upgrade tool login interface. And then start from step 4. If the MTK drive has installed drive
before, is no need to reinstall again.
②
①
⑤
④
③3