HARRIS CORPORATION M7200VTAC 사용자 설명서
MM-011553-001
In addition, the front panel contains a light-level sensor that samples ambient light levels for automatic
display and button backlight brightness adjustments. In other words, it automatically brightens the display
and backlights when higher external light levels exist and it automatically dims the display and backlights
during lower external light levels.
display and button backlight brightness adjustments. In other words, it automatically brightens the display
and backlights when higher external light levels exist and it automatically dims the display and backlights
during lower external light levels.
Button function may vary depending upon system programming, radio hardware, and
optional configurations. Complete the table in APPENDIX A if the keys have been
remapped to provide new functions.
optional configurations. Complete the table in APPENDIX A if the keys have been
remapped to provide new functions.
Table 6-1: Front Panel Default Controls and Functions
PART
FUNCTION
Power/Volume
Knob
Knob
Turn knob clockwise to power on the radio and increase volume.
Turn counter-clockwise to decrease volume and power off the radio.
Mic Connection
Connection for hand-held, hands-free, speaker-mic, or headset.
Emergency
Button
Button
If enabled through programming, the emergency button sends an emergency alert
and opens voice communication on the currently selected talk group or the default
emergency talk group (depending upon how the system is defined).
and opens voice communication on the currently selected talk group or the default
emergency talk group (depending upon how the system is defined).
To end an emergency call, press and hold the emergency button for approximately
four seconds.
four seconds.
Ambient Light
Sensor
Sensor
Radio automatically adjusts the display and button backlight brightness level based
on ambient light. Do not block this sensor.
on ambient light. Do not block this sensor.
or
While in the dwell display, scrolls through available talk groups.
Scrolls through selections within the active menu (available talk groups,
pre-programmed speed dial numbers, canned alert messages, etc.).
pre-programmed speed dial numbers, canned alert messages, etc.).
OPT/OPTION
CLR/CLEAR
Scrolls through available menu items.
Press to activate the current selection. In some cases, this is not necessary as the last
selection will automatically activate after a short period.
selection will automatically activate after a short period.
MENU
Display area
Menu selections and messages.
Network Connectivity icon.
Current Volume Level icon.
Volume numeric representation within the display (0 = Muted, 40 = Loudest).
User may select which one of several dwell displays the radio uses.
Pre-Set buttons
These buttons are used to store and recall user-selectable parameters such as scan
mode, selected profile, selected talk group, and priority talk group. Different
parameters can be stored at each of the three different pre-set buttons.
mode, selected profile, selected talk group, and priority talk group. Different
parameters can be stored at each of the three different pre-set buttons.
15