HARRIS CORPORATION M7200VTAC 사용자 설명서

Password entry requires a system model control head. Password characters are encrypted on the display 
using symbols to indicate the entry. The encryption symbols for each entry will appear in the display as 
they are scrolled through, for example: '-' and '+'. Press the # key twice to complete the entry process.  

 

If the password is wrong, the radio will not successfully register with the network for 
wide area voice reception. The radio can still be used in single-site mode. 

Using the keypad on a System Model, the radio can transmit DTMF tones corresponding to 
numbers/characters 0 — 9, * and # on the keypad. To overdial numbers/characters, transmit by pressing 
and holding the PTT button and then, press the corresponding keys (one at a time) on the keypad. 

The radio can store up to sixteen (16) standard profiles, one of which is the currently active profile. To 
change the currently active profile: 

1.  Press up or down using 

 until “ProfileMenu” is displayed. 

2.  Use 

 to scroll through the list of available profiles. 

3.  Profile becomes active when selected for longer than 2 seconds, when the 

 is pressed, or when 

the menu is changed using 

.  

Each profile stored in the radio can have up to sixteen (16) talk groups. One talk group within the 
currently active profile is set as the “selected talk group.” For the radio user, the selected talk group is 
typically the focus of most voice transmissions and receptions. There are two ways to change the selected 
talk group: 

1. 

U

se 

 to scroll through the menu until “TalkGrpMenu” appears on the bottom line of the 

display. The currently selected talk group appears in the top line of the display.  

2.  Use 

 to scroll through the available list of talk groups in the active profile. This list is 

determined by the OpenSky network administrator. 

From the dwell display, use the talk group selection knob or 

 to scroll through the available list of 

talk groups in the active profile.