Tyco Safety Products/Sensormatic AMS1140 사용자 설명서
AMS-1140 DETECTORS
8200-2684-02, REV. 0
SETUP AND SERVICE GUIDE
15 of 15
Specifications
Power Supply
Primary Input ........................................ 100-120Vac
or 200-240Vac @ 50-60Hz
Primary power fuse ........................... One 2A, 250V,
slo-blo, hi-breaking,
5mmx20mm fuse
Current draw .............. less than 0.5Arms @ 120Vac
Input power ....................................... less than 44W
Transmitter
Operating frequency ...................... 58kHz (+200Hz)
Transmit Burst Duration ................................. 1.6ms
Transmit Current (in Tx coil) ..................... 42A peak
Transmit Current (in Interconnect cable) .. 17A peak
Burst Repetition Rate:
Based on 50Hz ac .................................. 37.5Hz
Based on 60Hz ac ..................................... 45Hz
Antenna Coil Resistance ................ .25 ohms (±5%)
Receiver
Center Frequency .......................................... 58kHz
Alarm
Audio level ..................................................... 83dBA
Environmental
Ambient Temperature .. 0°C to 40°C (32°F to 104°F)
Relative Humidity .............0 to 90% non-condensing
Enclosure .......................................................... IPx0
Mechanical
Height .............................................. 137.1cm (54in)
Width ................................................. 35.8cm (14in)
Depth (base) ....................................... 8.6cm (3.4in)
Declarations
Regulatory Compliance
EMC ............................................... 47 CFR, Part 15
EN 300 330
EN 301 489
RSS 210
Safety .................................................... UL 60950-1
CSA C22.2.60950-1
EN 60950-1
REGULATORY PRODUCT NAME:
ZA1140-D = TYPE: AMS-1140
ZA1140-D = TYPE: AMS-1140
FCC ID: BVCAMS1140
FCC COMPLIANCE: This equipment complies with Part 15 of the
FCC rules for intentional radiators and Class A digital devices when
installed and used in accordance with the instruction manual.
Following these rules provides reasonable protection against harmful
interference from equipment operated in a commercial area. This
equipment should not be installed in a residential area as it can
radiate radio frequency energy that could interfere with radio
communications, a situation the user would have to fix at their own
expense.
FCC rules for intentional radiators and Class A digital devices when
installed and used in accordance with the instruction manual.
Following these rules provides reasonable protection against harmful
interference from equipment operated in a commercial area. This
equipment should not be installed in a residential area as it can
radiate radio frequency energy that could interfere with radio
communications, a situation the user would have to fix at their own
expense.
EQUIPMENT MODIFICATION CAUTION: Equipment changes
or modifications not expressly approved by Sensormatic Electronics
Corporation, the party responsible for FCC compliance, could void
the user's authority to operate the equipment and could create a
hazardous condition.
or modifications not expressly approved by Sensormatic Electronics
Corporation, the party responsible for FCC compliance, could void
the user's authority to operate the equipment and could create a
hazardous condition.
Other Declarations
WARRANTY DISCLAIMER: Sensormatic Electronics
Corporation makes no representation or warranty with respect to the
contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Further,
Sensormatic Electronics Corporation reserves the right to revise this
publication and make changes from time to time in the content hereof
without obligation of Sensormatic Electronics Corporation to notify
any person of such revision or changes.
Corporation makes no representation or warranty with respect to the
contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Further,
Sensormatic Electronics Corporation reserves the right to revise this
publication and make changes from time to time in the content hereof
without obligation of Sensormatic Electronics Corporation to notify
any person of such revision or changes.
LIMITED RIGHTS NOTICE: For units of the Department of
Defense, all documentation and manuals were developed at private
expense and no part of it was developed using Government Funds.
The restrictions governing the use and disclosure of technical data
marked with this legend are set forth in the definition of "limited
rights" in paragraph (a) (15) of the clause of DFARS 252.227.7013.
Unpublished - rights reserved under the Copyright Laws of the
United States.
Defense, all documentation and manuals were developed at private
expense and no part of it was developed using Government Funds.
The restrictions governing the use and disclosure of technical data
marked with this legend are set forth in the definition of "limited
rights" in paragraph (a) (15) of the clause of DFARS 252.227.7013.
Unpublished - rights reserved under the Copyright Laws of the
United States.
TRADEMARK NOTICE: Ultra•Max and Sensormatic are
registered trademarks of Sensormatic Electronics Corporation. Other
product names (if any) mentioned herein may be trademarks or
registered trademarks of other companies.
registered trademarks of Sensormatic Electronics Corporation. Other
product names (if any) mentioned herein may be trademarks or
registered trademarks of other companies.
No part of this guide may be reproduced in any form without written
permission from Sensormatic Electronics Corporation.
permission from Sensormatic Electronics Corporation.
RWH 01/2010