Larcan Inc MXI101U 사용자 설명서

Vendor or original manufacturer part numbers are indicated for most components.  

An index of LARCAN specified number are used to define and specify the following: 

•  parts made by a manufacturer to LARCAN specification; 
•  an assembled unit or “group” such as a PC Board or completed cabinet;  
•  assembly drawings and schematics; 
• standards. 

Depending on the application, AutoCAD drawing or Microsoft Word document format is used. 

Document numbers have the format YYZXXXXKn Rev m where: 

YYZ 

Prefix denoting drawing size and Product type. Can be 10A, 11A, 20B, 21B, 30C, 31C, 40D, 41D, 50E, 51E 

–  

describes drawing or document size, VHF or UHF application 

XXXX  Drawing Index number. Between 0000 to 9999. 
 
K 

Refers to the type of drawing / document: 

•  “no suffix”  for drawing of part (assembly or schematic) 
• P 

= 

Part 

•  G = Group of parts 
•  A = Assembly drawing 
•  F = PC board fabrication films and  
•  S = Schematic  

n 

Index number for drawing type. Part, group, assembly drawing or schematic next number and may be 

 

one or   more digits 

Rev 

Revision (sometimes denoted as R or R–) 

m 

Revision number and may be one digit or more. May contain a decimal (e.g., Revision 3.2) 

Drawings may consist of one or more sheets. Generally multiple sheets are used if one sheet is not enough to 
show all necessary information. Sometimes, especially with older drawings, multiple sheets are used to show 
more than one part or assembly. 

TSM20-350 Rev 0 February 8, 2006 

20-350-5 

MXi Technical Service Manual