Digital Monitoring Products Inc 1128 사용자 설명서
DESCRIPTION
Figure 1: 1128 Wireless
Glassbreak Detector
1
PROGRAM THE PANEL
When programming the 1128 in the panel, refer to the panel
programming guide as needed.
1.
At a keypad, enter
6653 (PROG) to access the
PROGRAMMER menu.
2.
Press
CMD until ZONE INFORMATION displays and
press a top row select key or area.
3.
Enter the wireless
ZONE NO and press CMD.
4.
Enter the
ZONE NAME and press CMD.
5.
Select
NT (night) the ZONE TYPE.
6.
Select the
AREA NO and press CMD.
7.
At the
NEXT ZN? prompt, select NO and press CMD
until
WIRELESS? displays.
8.
Select
YES when WIRELESS? displays and press
CMD.
9.
Enter the eight-digit
SERIAL# and press CMD.
10. Enter the
SUPRVSN TIME and press CMD.
11.
At the
NEXT ZN? prompt, select YES if you are
finished programming the zone. Select
NO if you
would like to access additional programming
options.
2
INSTALL THE BATTERY
Keep in mind, when setting up a wireless system, program
zones and connect the receiver before installing the included
CR123A battery in the transmitter.
zones and connect the receiver before installing the included
CR123A battery in the transmitter.
1.
Remove the holding screw at the lower end of the
1128 case and gently lift off the cover. See Figure 2.
1128 case and gently lift off the cover. See Figure 2.
2.
Observing polarity, place the battery in the holder
and press into place. See Figure 3 for the battery
location.
and press into place. See Figure 3 for the battery
location.
The 1128 Wireless Glassbreak
Detector is a fully-supervised,
low current shock and
glassbreak sensor that
provides detection coverage
up to 20 ft from framed glass
mounted in an outside wall.
You can mount the 1128 on
the ceiling or on an opposing
wall for maximum flexibility
and coverage. The 1128
operates using the supplied
3 V lithium battery.
Compatibility
All DMP 1100 Series
Wireless Receivers and
Burglary Panels.
What is Included?
•
One 1128 Wireless
Glassbreak Detector
•
One 3 V lithium
CR123A battery
•
Hardware Pack
Figure 2: Open the 1128
Figure 3: 1128 Battery Location
LED
Holding
Screw
Tamper
Battery
Holder
FIELD
TEST
1128 WIRELESS GLASSBREAK DETECTOR
Installation Guide