Digital Monitoring Products Inc PC0117 사용자 설명서

 

The XTL panel software can be updated via the panel’s programming (PROG) header. To update the panel

with a new software version, complete the following steps at the protected premise: 

1.  Connect a DMP 399 Cable from the Programming Header to the serial port of your PC operating

Remote Link and containing the XTL RU file.

3.  Start Remote Link and create or open the XTL control panel account that matches the panel to be

updated.

4.  Set the Connection Information Type to Direct with a baud rate of 38400 and choose the

appropriate COM port.

5.  Select Panel>Remote Update, then select the correct RU file for the XT panel model.
6.  Press and hold the LOAD button (S2), then press and release the RESET button.
7.  Release the LOAD button and click <Update> in Remote Link.
8.  After the software update is completed, remove the 399 cable and press the RESET button to

resume normal panel operation.