Digital Monitoring Products Inc PC0126P 사용자 설명서

The 9063 keypads allow users to present a proximity credential to the built-in proximity reader.  Users can also manually 

enter their user code into the keypad.  The keypad verifies the user code and its authority with the panel.  

This programming feature operates on 9063 keypads only.  Access the User Menu in one of two ways.  When MENU?  NO 

YES displays, choose YES and present your proximity credential to the reader or manually enter your user code into the 

keypad. 
From the User Menu, select USER CODES?.  Choose ADD.  At the ENTER CODE: - display, present the credential to the 

reader.  The keypad works by reading the user code from the data sent by the proximity reader.  For more information, 

refer to Entry Cards in the programming section of this document and the panel User’s Guide section on adding, deleting, 

and changing user codes.

DMP Keypads with internal proximity readers are compatible with most standard 125Khz Prox credentials available from 

HID and all DMP proximity credentials.  DMP Keypads are not compatible with iClass or other non-HID credentials.  There 

are custom and non-standard credentials from HID that are not compatible with DMP proximity keypads.  If you are using 

HID cards that have not been purchased directly from DMP, it is recommended to thoroughly test the application fully 

before installation.  DMP does not guarantee compatibility with credentials not purchased from DMP.

This User’s Guide covers 9063 keypads and contains different sections:  Keypad Arming and Disarming, and Keypad Entry 

Delay.  All of the examples displayed assume that CLOSING CODE is YES in panel programming.

Press COMMAND, the keypad displays ARM   DISARM.  Press the Select key under either option.  The keypad displays ENTER 

CODE: -.  Present your card to the reader.  Once validated by the system, all areas assigned to your code arm or disarm 

automatically.

      ABC SECURITY

ARM                DISARM

     ABC SECURITY

ENTER CODE:  –

     ABC SECURITY

ALL?            NO    YES

Select NO to arm or disarm individual areas.  
Select YES, or simply wait, to automatically arm or disarm all areas for which you are authorized.

Present your card to the reader or press COMMAND, the keypad displays DISARM? or PERIM  ALL (when arming).  Press the 

Select key under the desired option.  The keypad displays ENTER CODE: -.  Present your card to the reader.  Once validated 

by the system, the selected areas arm or disarm automatically.

Present your card to the reader. If the system is armed, once the card is validated, all areas are disarmed and the keypad 

displays ALL SYSTEM OFF.  If the system is disarmed when you present your card, once the card is validated, HOME  SLEEP  

AWAY displays.  Manually select HOME, SLEEP, AWAY or after a short time-out, all areas automatically arm in the AWAY 

mode.

Once the entry delay starts, the keypad sounds an entry tone and displays ENTER CODE:  - . Present your card to the 

reader.  Once validated by the system, all areas assigned to your code arm or disarm automatically.

Entry delay starts.

The System disarms the areas to which you are authorized.

ABC SECURITY

ENTER CODE: –