Digital Monitoring Products Inc PC0132 사용자 설명서
8
9800 Series Keypad Installation Guide
Programming the Keypad in the Panel
The keypads can be programmed into the control panel by entering the serial number
in Device Setup panel programming, or alternatively using the wireless keypad
association operation. A maximum of 4 keypads may be used with the panel.
Device Setup Programming
Program the keypad as a device in Device Setup during panel programming. At the
serial number prompt, enter the eight-digit serial number. Continue to program the
device as directed in the panel programming guide.
Note: If the keypad serial number is entered manually, the Wireless Keypad
Note: If the keypad serial number is entered manually, the Wireless Keypad
Association operation is not required.
Wireless Keypad Association
To enable association operation in the XTL Series panel, press the XTL Series RESET
button 3 times within 12 seconds allowing 3 seconds between each press of the reset
button. When in keypad association, the XTL Series Red and Green logo LEDs turn on
steady.
To enable association operation in the XR100/XR500, XR150/XR350/XR550 or XT30/
XT50 panel, reset the panel 3 times within 12 seconds. Allow the keypad bus
Transmit/Receive LEDs to turn back on between each reset.
To enable association operation in the keypad use the Keypad Wireless Survey
feature.
For 60 seconds the panel listens for wireless keypads that are in the Installer Options
Menu (3577 CMD) and have not been programmed, or associated into another panel.
Those keypads are assigned to the first open device position automatically based upon
the order in which they are detected.
Accessing Keypad Wireless Survey
Access the Options menu through the carousel menu. While in the Option display,
press the Installer Options icon and enter the code 3577 (INST) at the keypad and
press CMD.
KPD KPD KPD
OPT DIAG RF STOP
OPT DIAG RF STOP
Keypad Wireless Survey (KPD RF)
Press KPD RF to start the RF communication survey test.
The keypad Power/Armed LED turns Red, indicating
communication has not been established with the panel
receiver. When successful communication has been
established, the keypad Power/Armed LED turns Blue.
RF SuRvey