Nikon Corporation 1150EB 사용자 설명서
E
92
Re
fe
fe
re
nce
S
e
cti
o
n
No access.
The camera could not receive the communication signal
from the smart device. Set Wi-Fi network to On in Wi-
Fi options in the setup menu, and wirelessly connect
the camera and smart device again.
from the smart device. Set Wi-Fi network to On in Wi-
Fi options in the setup menu, and wirelessly connect
the camera and smart device again.
81,
Could not connect.
The camera failed to establish the connection while
receiving the communication signals from the smart
device. Select a different channel in Channel in Wi-Fi
options in the setup menu and establish the wireless
connection again.
receiving the communication signals from the smart
device. Select a different channel in Channel in Wi-Fi
options in the setup menu and establish the wireless
connection again.
81,
Wi-Fi connection
terminated.
terminated.
A cable was connected to the camera while the camera
and smart device were wirelessly connected, the battery
level became low, or the connection was aborted due to
poor connectivity. Disconnect the cable and establish
the wireless connection again.
and smart device were wirelessly connected, the battery
level became low, or the connection was aborted due to
poor connectivity. Disconnect the cable and establish
the wireless connection again.
81,
Lens error
A lens error occurred.
Turn the camera off and then on again. If the error
persists, contact your retailer or Nikon-authorized service
representative.
Turn the camera off and then on again. If the error
persists, contact your retailer or Nikon-authorized service
representative.
20
Communications error
An error occurred while communicating with the printer.
Turn the camera off and reconnect the USB cable.
Turn the camera off and reconnect the USB cable.
E25
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the battery, and
turn the camera on. If the error persists, contact your
retailer or Nikon-authorized service representative.
Turn the camera off, remove and reinsert the battery, and
turn the camera on. If the error persists, contact your
retailer or Nikon-authorized service representative.
10, 20
Display
Cause/Solution
A