Kelvin Hughes Limited SXV-A1 사용자 설명서
SharpEye™ SCV & SxV X-Band Radome Radar
Chapter 5: Preparation for installation
KH-1650-CA issue 1
Page 20 of 60
5.2 Fitting kits
KIT CONTENTS
Typically the SCV/ SxV system is supplied with an installation kit that includes:
FIXINGS
All the necessary fixings required to mount the SCV/ SxV. Fixings supplied are 316 (A4) grade
stainless steel, passivated, zinc plated for marine applications
ANTI-VIBRATION MOUNT
An anti-vibration mount is provided as standard with SCV systems and can be ordered separately
for SxV systems (detailed in the fitting kits below).
Before commencing the installation, check the kit contents of this against the packing list contained
within the kit, ensuring all necessary parts are present. Any missing or damaged parts should be
immediately reported to Kelvin Hughes Ltd.
SCV
SCV-A160-1 fitting kit
SCV-A172
Anti-vibration
mount
The anti-vibration mount is supplied as standard and
MUST BE
INSTALLED on all SCV applications. Please refer to section 6.1 for
assembly details.
SCV-A170
Cable bracket
assembly
This assembly is assembled onto the anti-vibration plate.
Please refer to section 6.2 for assembly details.
SCV-A145
Earth strap
Earth strap that must be used to connect the radar to a tested /
proven earth/ ground.
Please refer to section 7.4 for assembly details.
55-100-0566-001
Anti-Corrosion
Paste / grease
10ml Syringe of anti-corrosion paste/ grease.
Please refer to section 6.3 for application details.
Fasteners
Nuts, bolts & washers
M4
M8 x 25mm
Used to assemble the SCV-A170 / SCV-A172 to the SCV.
M8 x 45mm
Used to fix the SCV to its mounting position
See notes in section 6.3 regarding maximum thread depths.
SxV
SXV-A100 fitting kit
SCV-A145
Earth strap
Earth strap that must be used to connect the radar to a tested /
proven earth/ ground.
Please refer to section 7.4 for assembly details.
55-100-0566-001
Anti-Corrosion
Paste / grease
10ml Syringe of anti-corrosion paste/ grease.
Please refer to section 6.3 for application details.
Fasteners
Nuts, bolts & washers
M8 x 25mm
Used to fix the SCV to its mounting position
See notes in section 6.3 regarding maximum thread depths.
SCV-A135
(OPTIONAL)
Anti-vibration
mount
An anti-vibration mount is not supplied as part of an SxV
installation kit but can be requested as a chargeable option for
use in situations where vibration is anticipated.
CABLES
Typical installation kits do not contain cabling
for the SCV and SxV which must be ordered separately.
SCV/ SxV
Standard cables part numbers
SCV-A167-**
Note 1
Power Input cables. Standard length is 10m.
15, 20, 25 & 30m lengths are available on request. Refer to section 7.2.
Connects DC power to the radar assembly.
SCV-A168-**
Note 2
Ethernet Cable. Standard length is 10m.
15, 20, 25 & 30m lengths are available on request Connects the radar
assembly to the control system and provides communications (Control and
Video) to and from the unit. The cable supports Gigabit Ethernet.
Note 1: Where -** is the cable length in metres, e.g. a standard 10m Power cable would be SCV-A167-10.
Note 2: SCV variant SCV-A1-10-ADAC should be ordered with power cable SCV-A177-** rather than SCV-A167-**. Please
contact Kelvin Hughes Ltd if alternative cable assemblies are required.