Philips Lighting Company LCGEN2RC 사용자 설명서
“I” button wasn’t pressed
long enough
long enough
Redo the procedure under “2. Linking
LivingColors lamps”. If it was linked
successfully, the lamp will give 1 green flash;
if the linking was unsuccessful it will revert to
its previous settings immediately without
flashing green.
LivingColors lamps”. If it was linked
successfully, the lamp will give 1 green flash;
if the linking was unsuccessful it will revert to
its previous settings immediately without
flashing green.
I cannot link multiple
LivingColors lamps
LivingColors lamps
The LivingColors lamps
belong to different
versions
belong to different
versions
Check if the lamps you cannot link both have
a “G2” sign on the back of the remote control
and at the bottom of the lamp itself. If one of
the lamps does not have it, it cannot be linked
with another lamp that does (but it can still be
linked with other lamps that do not have the
G2 sign).
a “G2” sign on the back of the remote control
and at the bottom of the lamp itself. If one of
the lamps does not have it, it cannot be linked
with another lamp that does (but it can still be
linked with other lamps that do not have the
G2 sign).
I cannot start the
automatic color changing
mode
automatic color changing
mode
The sweep movement
was not correct
was not correct
If color changes to another (static) color, but
no color loop starts, then your sweep
movement was not correct; please try again
no color loop starts, then your sweep
movement was not correct; please try again
LivingColors is still not
working up to standards
working up to standards
Other problem
Contact the Philips Lighting Contact center
(see Warranty and Service)
(see Warranty and Service)
Cleaning and maintenance:
Remove the plug from the wall socket.
To avoid scratching, the LivingColors lamp, remote control and adaptor should only be cleaned
with a soft dry cloth.
Do not use cleaning agents.
Safety instructions:
Keep the plug and LivingColors away from liquids and humidity.
-
LivingColors is for indoor use only. Do not use in wet locations, e.g. bathrooms or
outdoors.
outdoors.
-
LivingColors is not a toy designed to be played with by children.
-
Do not place on hot surfaces
-
For safety reasons and under the terms of the warranty, the LivingColors and plug must
not be opened.
not be opened.
-
Only use the adaptor supplied: using a different adaptor can damage your LivingColors.
Environment:
If you discard the appliance in due course, dispose of it in accordance with the instructions of the
local authority. Remove the batteries when you discard the remote control. Do not throw the
batteries away with normal household waste. They must be handed in at an official collection
point or at a Philips Dealer, both of which will dispose of the batteries in an environmental friendly
way.
Plug specifications:
AC adapter
Model:
EADP-10EB C (EU type)
Input:
100 - 240V ~ 0.3A
50-60 Hz
Output:
18.5V
0.83 A
Power consumption of the luminaire: up to 15.4 W
Remote Control:
Batteries:
Remote Control:
Batteries:
3 x Philips Powerlife Alkaline AAA LR03, 1.5 V.
Wireless specifications: