Laird Controls North America Inc. 9116 사용자 설명서
Error! Reference source not found.-9116-A001
1
Introduction
1.1 Purpose
This document provides instructions for testing (qualifying) an installed Transponder Tag Reader System.
This includes the testing of the cables and equipment for the locomotive associated with the Pull Back
Protection System.
This includes the testing of the cables and equipment for the locomotive associated with the Pull Back
Protection System.
1.2 Scope
This procedure describes a series of tests that are sufficient for making sure the locomotive components
associated with the Pull Back Protection System are well integrated together and functioning properly.
associated with the Pull Back Protection System are well integrated together and functioning properly.
1.3 Applicability
This document applies to 2OPT-9116-Annn Transponder Reader Systems.
1.4 Overview
This document includes a test procedure section that describes the required material and test procedure steps
to qualify a newly installed Transponder Tag Reader and Antenna. The installation is very simple and there is
no user adjustment required.
to qualify a newly installed Transponder Tag Reader and Antenna. The installation is very simple and there is
no user adjustment required.
1.5 Cautions and Warnings
According to the requirements of FCC 15,21;
Users are cautioned that changes or modifications to this equipment are expressly prohibited
and could void the user's authority to operate the equipment.
and could void the user's authority to operate the equipment.
According to the requirements of IC;
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Cattron Group International
Proprietary and Confidential
Page 1-1