Laird Controls North America Inc. EXC9158A 사용자 설명서
Edition 04/2007 US, Version A001, Excalibur, Subject to Technical Changes
Page: 4
1.2 Operation of Radio Remote Control System Components with Identical System
Address
For a safe operation, the radio control transmitter and the radio control receiver are uniquely paired by way
of an unique system address. This system address will only be assigned once by the manufacturer.
For further information, refer to the applicable standards and regulations, e.g. for crane control: [BGR 149
respectively DIN EN 60204-32]. It must be ensured that only one transmitter-receiver pair can be operated
with a specific system address.
An identical system address will not be assigned again by Cattron-Theimeg Europe GmbH & Co.KG
unless this is expressly requested by the Customer.
In cases where several transmitters and/or receivers for the control of a machine are available,
precautions must be taken to ensure that only 1 transmitter, respectively 1 receiver, can be used at any
one time.
In the case of a supply of radio remote control system components with an identical system address,
Cattron-Theimeg Europe GmbH & Co.KG ships components with warning instructions for the user that
must be affixed to the devices.
The customer undertakes to ensure that no other radio remote control system with the same system
address is operated. In the event of a breach of this undertaking, the customer is liable for the resulting
damages/loss and he shall indemnify the manufacturer against all third-party liability claims.
of an unique system address. This system address will only be assigned once by the manufacturer.
For further information, refer to the applicable standards and regulations, e.g. for crane control: [BGR 149
respectively DIN EN 60204-32]. It must be ensured that only one transmitter-receiver pair can be operated
with a specific system address.
An identical system address will not be assigned again by Cattron-Theimeg Europe GmbH & Co.KG
unless this is expressly requested by the Customer.
In cases where several transmitters and/or receivers for the control of a machine are available,
precautions must be taken to ensure that only 1 transmitter, respectively 1 receiver, can be used at any
one time.
In the case of a supply of radio remote control system components with an identical system address,
Cattron-Theimeg Europe GmbH & Co.KG ships components with warning instructions for the user that
must be affixed to the devices.
The customer undertakes to ensure that no other radio remote control system with the same system
address is operated. In the event of a breach of this undertaking, the customer is liable for the resulting
damages/loss and he shall indemnify the manufacturer against all third-party liability claims.
1.3 Use for Intended Purpose
The product may only be used in a technically perfect condition, by instructed personnel and subject to the
compliance with the applicable safety and accident prevention regulations. The product is electrical
equipment for use at the rated voltage shown on the type plate. A use for the intended purpose also
requires a compliance with the contents of this Operating Manual, particularly the therein described
requirements and instructions.
compliance with the applicable safety and accident prevention regulations. The product is electrical
equipment for use at the rated voltage shown on the type plate. A use for the intended purpose also
requires a compliance with the contents of this Operating Manual, particularly the therein described
requirements and instructions.
1.4 Improper Use
Certain work on/with, and use of, the product is not permitted:
•
tampering with electrical equipment,
•
mains supply connection deviating from the voltage/frequency data on the type plate,
•
work on live components,
•
incorrect operating,
•
improper use of the product,
•
not permitted removal of covers,
•
insufficient maintenance,
•
failure to observe the operating temperature range.
A failure to observe the above can result in danger for life and limb and/or damage to the product.
1.5 Safety Instructions for Assembly/Disassembly
Assembly/disassembly work may only be performed by qualified persons.
Warning!
Please assure suitable interference protection element of triggered
electrical relay or valves.
Please assure suitable interference protection element of triggered
electrical relay or valves.
The system must be isolated from the electrical power in accordance with the applicable regulations. User-
specific rules must be observed. Only suitable tools may be used. Unauthorised access to the assembly
area must be prevented.