Alps Electric WD1G763 사용자 설명서

LOCK Button
UNLOCK Button
Trunk Button

　The connector is arranged as shown in the figure below.

Terminal No.

I/O

A

-

B

I/O

C

I/O

D

I/O

E

I/O

F

-

G

-

■CAUTION■

Operation of frequency

B-CAN(-)

B-CAN(+)

IGN

Operating voltage

Keyless DC9～16V

Immobilizer DC6～16V

+B

AC/DC Supply

DC12V

When the user pushes LOCK, UNLOCK, and the TRUNK button of
HAND UNIT, the RF electric wave is output, and IMMOBI UNIT receives
it, and an open lock, the close lock of the door, and the signal of the
trunk opening are output.

W69xL90.8xH77.2（mm）

FCC WARNING
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the

Size

・Give a shock.
・Get it wet. If it got wet, wipe and dry up.
・Disassembly and modification.

 This device complies with Part 15 of FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of this device.

MAX 230mA(@12.5V 25℃) at operation

GND

S-NET

K-LINE

This unit is installed in vehicle. It performs communication with keyless unit
by LF, processes RF signal from keyless unit, and performs actions
according to the signal.

　Unit Assy Immobi&Keyless communicates with the transponder in the
hand unit  when the user inserts the hand unit in the key cylinder, and it
rotates

Product name : UNIT ASSY IMMOBI &KEYLESS

Type : TWD1G763

Terminal Name

Operating temperature

range

-40~＋85　degree C

RF : 433.92MHz

LF: 125kHz

MAX 2mA(@12.5V 25℃) at standby

Weight

   Please DO NOT the following. Engine is not started by failure of
electronic parts. (Product can not receive the signal correctly)

   Pay attention to the following.

・It may not be operated when using the equipment of the same
frequency band in the vicinity.

0.075kg

Consumption current

spec

IG1