Nagano Japan Radio Co . Ltd. NJT511 사용자 설명서
17
Loading the Battery Cartridge
Before the first use of the BHT, be sure to load the battery cartridge as shown below.
The battery cartridge is not loaded in the BHT when shipped from the factory.
The battery cartridge is not loaded in the BHT when shipped from the factory.
Loading the battery cartridge
(1) Turn the BHT upside down.
(2) As shown below, slide the battery cover lock in the direction of the arrow and
remove the battery cartridge cover.
(3) Check the polarity (positive and negative) of the battery cartridge. Then, load it
so that the end of the battery pull strap appears above the battery cartridge as
shown below. This facilitates easy removal of the battery cartridge.
shown below. This facilitates easy removal of the battery cartridge.
(4) Put the battery cartridge cover back into place taking care not to pinch the
battery pull strap between its cover and the bottom cover. Then, return the
battery cover lock to its original position.
battery cover lock to its original position.
(5) Place the BHT on the CU-300 to charge the battery cartridge.
The BHT has an integrated rechargeable backup power source which backs
up the memory and calendar clock in the BHT when no battery cartridge is
loaded or the voltage level drops below the specified level. The backup
power source is automatically charged by the battery cartridge.
up the memory and calendar clock in the BHT when no battery cartridge is
loaded or the voltage level drops below the specified level. The backup
power source is automatically charged by the battery cartridge.
• When you first load battery cartridge after purchase or you load it after
leaving the BHT unused for a long time, do not remove the battery
cartridge for at least 10 minutes after that loading. This is for charging the
memory backup source integrated in the BHT.
cartridge for at least 10 minutes after that loading. This is for charging the
memory backup source integrated in the BHT.
• If you leave the BHT without the charged battery cartridge loaded for a
long time, the memory contents will no longer be backed up so that the
message "Contact your administrator. Note the error number. (XXXX)"
or "Set the current date and time." may appear on the LCD.
message "Contact your administrator. Note the error number. (XXXX)"
or "Set the current date and time." may appear on the LCD.
• If you will not be using the BHT for a long time, follow the instructions
given in the "Battery Replacement Notes" on the next page.
Charge terminals
Battery cover lock
Battery cover
Battery pull strap
Battery cartridge