Lectrosonics Inc LTC1 사용자 설명서
Digital Hybrid Wireless Belt-Pack Transmitter
Rio Rancho, NM
13
Enabling Remote Control
Transmitter settings can be configured using special
tones generated by Lectrosonics RM or RM2 remote
control units, or by a smartphone using a remote control
application such as Lectro RM (available on the Ap-
pStore or Google Play). Enable this feature on the
transmitter with the following menu items.
tones generated by Lectrosonics RM or RM2 remote
control units, or by a smartphone using a remote control
application such as Lectro RM (available on the Ap-
pStore or Google Play). Enable this feature on the
transmitter with the following menu items.
Rf On?
BatType
BatType
Remote
TxPower
Remote
Enable
Ignore
Ignore
The following settings can be configured:
s
s
s
s
s
Setting Transmitter Output Power
The output power can be set to 50 mW or 100 mW.
Compat
Tuning
Tuning
TxPower
Phase
TxPower
50 mW
100 mW
100 mW
Restoring Default Settings
This is used to restore the factory settings.
BatType
Remote
TxPower
Remote
TxPower
Default
Default
settings
settings
No
Yes
Yes
IR Sync Operation
A receiver with IR Sync capability can transfer the set-
tings for Frequency, Step Size and Compatibility mode
to the transmitter via the IR ports. The transfer is trig-
gered by a switch in the receiver. When the settings are
successfully transferred, an confirmation will appear on
the transmitter LCD.
tings for Frequency, Step Size and Compatibility mode
to the transmitter via the IR ports. The transfer is trig-
gered by a switch in the receiver. When the settings are
successfully transferred, an confirmation will appear on
the transmitter LCD.
IR Sync
OK
If a mismatch exists and the transfer cannot be com-
pleted, an error message will appear on the transmitter
LCD indicating what the problem is.
pleted, an error message will appear on the transmitter
LCD indicating what the problem is.
IR Sync
BLOCK
Mismatch
Mismatch
IR Sync
COMPAT
Mismatch
Mismatch
A BLOCK Mismatch indicates that the transmitter and
receiver are on different frequency blocks and the fre-
quency cannot be set to match. A COMPAT Mismatch
will appear when the compatibility mode in the receiver
is not available in the transmitters; for example, when
you are trying to sync a US model to work an export
model.
receiver are on different frequency blocks and the fre-
quency cannot be set to match. A COMPAT Mismatch
will appear when the compatibility mode in the receiver
is not available in the transmitters; for example, when
you are trying to sync a US model to work an export
model.