DISH Technologies L.L.C. AVAD1 사용자 설명서
2
For more details, go to:
MySlingStudio.com/CameraLink
Getting Started
Important: If you have multiple CameraLinks, each one
must be paired one-at-a-time to SlingStudio.
must be paired one-at-a-time to SlingStudio.
Charge your SlingStudio™ CameraLink by connecting
the included USB cable from the device to any USB wall
charger (not included). The CameraLink is fully charged
when all four battery LEDs are green.
the included USB cable from the device to any USB wall
charger (not included). The CameraLink is fully charged
when all four battery LEDs are green.
Connect the CameraLink to your camera’s HDMI output
using the included HDMI cable.* To power on the
CameraLink, press and hold the Power button for 3
seconds.
using the included HDMI cable.* To power on the
CameraLink, press and hold the Power button for 3
seconds.
For initial setup, the CameraLink automatically powers on
in WPS mode, indicated by a blinking red LED.
in WPS mode, indicated by a blinking red LED.
To pair the CameraLink to SlingStudio, ensure that
the CameraLink, SlingStudio and iPad with the
SlingStudio Console app are in close proximity. Then
open the Console app on your iPad, go to Settings and
turn on WPS mode to connect to the CameraLink
automatically.
SlingStudio Console app are in close proximity. Then
open the Console app on your iPad, go to Settings and
turn on WPS mode to connect to the CameraLink
automatically.
The Power LED will turn white when the CameraLink is
successfully paired to SlingStudio. These two devices will
automatically connect with each other on subsequent
power-ups.
successfully paired to SlingStudio. These two devices will
automatically connect with each other on subsequent
power-ups.
1
2
*The HDMI cable included with the CameraLink is a
micro-to-mini-HDMI cable that allows connection
with cameras that have a mini-HDMI port.
If your camera has a standard HDMI or micro-HDMI
port, please see the cable accessory options at
MySlingStudio.com/CameraLink.
Optional: Use the included hot shoe mount to
mount your CameraLink to your camera or tripod.
Please note:
•
•
•
To power off the CameraLink, press and hold the Power
button for 3 seconds.
To pair the CameraLink to another SlingStudio, be sure
that both devices are powered on. Unpair the
CameraLink from the first SlingStudio by pressing and
holding the CameraLink’s Power button for 10 seconds,
until the Power LED blinks red. Then repeat Step 3 with
the other SlingStudio.
If pairing more than one CameraLink to SlingStudio,
repeat these three steps for each CameraLink.
button for 3 seconds.
To pair the CameraLink to another SlingStudio, be sure
that both devices are powered on. Unpair the
CameraLink from the first SlingStudio by pressing and
holding the CameraLink’s Power button for 10 seconds,
until the Power LED blinks red. Then repeat Step 3 with
the other SlingStudio.
If pairing more than one CameraLink to SlingStudio,
repeat these three steps for each CameraLink.
3
QSG_SlingStudio CamersLink 213753_01
Inside
8.75” x 6.75”