Checkpoint Systems Inc. FISOCKS 사용자 설명서
4-16
I L S O p e n P l u s 3 . 0 I n s t a l l a t i o n M a n u a l
Transferring Inventory Data
Once you complete scanning inventory, follow these instructions to transfer the data.
1
After you have finished collecting inventory by tapping Done, a dialog window
displays asking if you want to transfer the data collected. Tap OK to do so.
displays asking if you want to transfer the data collected. Tap OK to do so.
Note: If you wish to continue the inventory collection after you have pressed Done, press Cancel to
prevent file transfer and re-enter inventory collection mode.
2
Unplug the cable from the bottom of the Portable Data Terminal.
3
Dock the Portable Data Terminal into the cradle. A Transferring window displays on
the Portable Data Terminal while data is transferring to the Intelligent Library
Controller.
the Portable Data Terminal while data is transferring to the Intelligent Library
Controller.
Figure 4.22
Portable Interrogator Operations
4
Once the transfer is completed, the Intelligent Library Controller displays the Portable
Inventory Reader Operations window. The inventory you transferred is converted by
the Intelligent Library Controller to a text file containing the list of barcodes. The file
name and location is displayed in the Transfer Status Display window. When the
process is finished, click Close on the Portable Interrogator Operations window.
Inventory Reader Operations window. The inventory you transferred is converted by
the Intelligent Library Controller to a text file containing the list of barcodes. The file
name and location is displayed in the Transfer Status Display window. When the
process is finished, click Close on the Portable Interrogator Operations window.
The Intelligent Library Controller then converts the information to the inventory file
format used by the LMS and copies it to a directory from which the LMS can copy it
(using FTP).
format used by the LMS and copies it to a directory from which the LMS can copy it
(using FTP).
5
The Portable Data Terminal displays Transfer Complete. Tap OK to return to the ILS
Inventory Main window.
Inventory Main window.
You may begin another inventory collection by selecting Start. Or, exit to the main
window by clicking OK found at the top-right of the screen.
window by clicking OK found at the top-right of the screen.