Whetron Industrial Co Ltd 0001 사용자 설명서

 

FCC ID: DPB-0001

 

  3、ECU Function Description：

 

3.6. PANIC： 

Pushed PANIC button for over 1.5secs and system accessed PANIC status.     
Siren chirped 30 sec. and flasher twinkled for 30 sec. continuously.   
To exit PANIC status, pushed PANIC or UNLOCK button once. Siren chirp and flasher 
twinkle terminated immediately.

 

 
 

3.7. Security Activating：(N=3,6,9, alternatives for user’s choice) 

A). Under ARM status, alarm activated for N cycles if IGN ON or door/ trunk/ hood opened 

and remained Open status.   
(1 circle = Siren chirped 30 sec. and flasher twinkled 30 sec. then suspend 15 sec.).   
1). Within 3 cycles, system activated and doors closed status , doors locked 

automatically. 

2). After 3 cycles , doors still on open status , doors locked automatically. 

B). Occasional strike or vibration, system alarmed by two stages:   

1). Under ARM status, slight strike or vibration caused siren chirped once (0.15sec).   

If strike or vibration repeated three times within 10secs, siren chirped for 30 sec. and 
flasher twinkled for 30 sec.       

2). Under ARM status, violent strike or vibrated caused siren chirped for 30 sec. and 

flasher twinkled for 30 sec.   

 

 
 
 
 
 

3.8. Engine CUT： 

Alarm activating, ST CUT RELAY will be operated to terminate the engine start 

 

 
3.9. Alarm Suspend： 

A). On activation of siren and flasher, pushed LOCK button to suspend activation. 

System accessed to ARM status after 3 sec. 

B). On activation of siren and flasher, pushed UNLOCK button to terminate operation. 

System accessed to DISARM status. 

 
 

3.10. DISARM by key： 

Under ARM status and TX lost, IGN ON / OFF for over 10 times within 15 sec. System 
accessed to DISARM status without TX. .Siren and flasher terminated. 

 
 
 
 

Strike Sensitivity Adjust