Locus Solutions LLC 101006 사용자 설명서
Confidential Preliminary-Subject to Change
2013 Locus Solutions
Page 2 of 6
Scope
This document is a user manual for the SmartTraxx go 1.1 monitoring temperature device.
Description
The SmartTraxx go 1.1 is a self integrated commercial grade monitoring temperature device that uses
in
in
the cold storages
. SmartTraxx go 1.1 is optimized for reliability, cost and size.
All antenna including GSM antenna are internal to the device. Data reporting can be initiated by a
command center or by the device itself via GSM/GPRS, SMS or PDP pathways.
command center or by the device itself via GSM/GPRS, SMS or PDP pathways.
The SmartTraxx go 1.1 is unique in that it is intrinsically expandable. A screw fastened
expansion door secures SIM card access.
expansion door secures SIM card access.
The SmartTraxx go 1.1 has a embedded lithium battery, the battery has 1800mAh capacity .
The SmartTraxx go 1.1 is based on chip level design. The application software executes on the base
level Central Processing Unit (CPU) under direct Operating System (OS) control.This approach
provides a much more reliable, lower power and faster response than module/processor architectures.
Unlike in common module/processor based designs; the SmartTraxx go 1.1 design allows direct
operating system access by the application, thus mitigating the need for a redundant external
processor.
level Central Processing Unit (CPU) under direct Operating System (OS) control.This approach
provides a much more reliable, lower power and faster response than module/processor architectures.
Unlike in common module/processor based designs; the SmartTraxx go 1.1 design allows direct
operating system access by the application, thus mitigating the need for a redundant external
processor.
For added monitoring temperature application ,a
temperature sensor IC oversees the
SmartTraxx go
1.1
system operation.
The SmartTraxx go 1.1 Device can be provisioned for UDP and SMS data services for both
application command and data transactions within the 850 & 1900 or 900 & 1800 MHz
GSM bands. Network provisioning is done with standard SIM cards.
application command and data transactions within the 850 & 1900 or 900 & 1800 MHz
GSM bands. Network provisioning is done with standard SIM cards.
A separate dedicated one wire UART port is provided for general use as well as
development and programming support. A USB Port that is compliant with Version 2.0 of the USB
standard for high speed operation is provided for upgrade/download the program.
development and programming support. A USB Port that is compliant with Version 2.0 of the USB
standard for high speed operation is provided for upgrade/download the program.
The power input, ground that are provided by the internal lithium battery that supports connection
of a rechargeable battery.
of a rechargeable battery.
Over The Air (OTA) application firmware updates are supported through at TFTP connection to a
server. The entire image can be updated using one simple command.
server. The entire image can be updated using one simple command.
This includes transient
electrical noise and Electro Static Discharge (ESD).
The SmartTraxx go 1.1 is a small
yellow - white
box with unremarkable features. Two LED status
indicators
are provided to verify correct installation and initial operation. A unique power management feature
allows these LEDs to be extinguished once installation is verified to be correct. This feature
reduces power.
are provided to verify correct installation and initial operation. A unique power management feature
allows these LEDs to be extinguished once installation is verified to be correct. This feature
reduces power.
As with all monitoring temperature device , the SmartTraxx go 1.1 should be used in a
Cold
storage
s that it is a
enclosed space
. Double sided foam tape can be used to secure the surface not
facing the sky if needed.
Physical Attributes
Figure 1 shows various views of the SmartTraxx go 1.1 Device and its critical physical features.