SHENZHEN ASIA BRIGHT INDUSTRY CO LTD AS-CF001 사용자 설명서

 

(Please keep this instruction pamphlet.)

 

IMPORTANT 

YOU MUST SET CEILING FAN MANUAL SWITCH TO HIGH SPEED 

AND LIGHT KIE (IF ANY) TO BE ON POSITION BEFORE OPERATING 

REMOTE CONTROL.

 

 

1.  Read and save these instructions. 

2.  Please note that all fixed wiring appliances should be installed by a qualified electrician. 

3.  Turn power supply off at fuse box before working on remote control receiver or ceiling fan. 

4.  Before installing the receiver into the fan canopy set code on receiver (see Code Set Up) 

5.  Install receiver into the ceiling fan canopy of the fan to ensure proper protection. 

6.  This unit is to be used for the control of ceiling fan and in an AC110/120V 60Hz power supply 

only. 

7.  Do not pull on or cut leads shorter on receiver. 

8.  Do not drop or bump the unit. 

9.  PLEASE NOTE: The battery will weaken with age and should be replaced before leaking takes 

place as this will damage the transmitter. Dispose of used battery properly; keep the battery out of 

reach of children. 

CAUTION: To reduce the risk of fire or injury, do not use this product in conjunction with any variable 

(rheostat) wall control. 

CAUTION: INCORRECT WIRE CONNECTION WOULD DAMAGE THIS RECEIVER.

 

1. Ceiling fan must be set a HIGH speed and light kit (If any) at ON position by pulling the “Pull 

Switch” after installation. 

2. Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The 

canopy comes up to cover the receiver and bracket.