Uniden America Corporation UB315 사용자 설명서

9

• Trunk Tracking – Follow UHF High Band UHF

800/900MHz trunked public safety and public service
systems just as if conventional two-way communications
were used. 

• Digital Capable – With the APCO 25 Digital card (BCi25D)

installed, you can monitor project 25 systems.

• Multi-Track – Track more than one trunking system at a

time. Scan conventional and trunked systems at the same
time. 

• 1000 Channels – Program one frequency into each

channel. You must have at least one channel programmed
to use the Scan mode.

• 17 Bands, 10 Banks – Includes 17 bands, with Aircraft and

800 MHz.10 banks with 100 channels each are useful for
storing similar frequencies to maintain faster scanning
cycles or for storing all the frequencies of a trunked system.

• 25 MHz-1300 MHz – Indicates the range of frequencies that

can be searched within the bands of your scanner.

Note: The frequency coverage is not continuous and

excludes the cellular band, 512-806MHz.

• 10 Priority Channels – You can assign one priority

channel in each bank. Assigning a priority channel allows
you to keep track of activity on your most important
channel(s) while monitoring other channels for
transmissions. You can also assign trunking priority
talkgroups.

• Priority Plus Scan – You can keep only priority channels

you assigned in the selected bank.

• Preprogrammed Service (SVC) Search – Allows you to

toggle through preprogrammed public safety, news media,
TV broadcast audio, Ham, CB, FRS, special low power, 
railroad, aircraft, marine, racing, and weather frequencies.

• Unique Data Skip – Allows your scanner to skip unwanted

data transmissions and reduces birdies.

• Memory Backup – If power is disconnected, the

frequencies programmed in your scanner are retained in
memory.

• Direct Channel Access – Go directly to any channel

without entering the menu mode.

• Attenuator – Reduces the signal strength on a per

frequency basis.

BC250D  9/20/2 2:51 PM  Page 9