Uniden America Corporation UB315 사용자 설명서

scanner stops on the frequency you want to store.

2. Press TRNSFR to store the 

frequency in the channel you 
selected. The smallest empty 
channel number flashes on the
display. If necessary, you can also
change the channel by scrolling the
VFO. 

3. Press E.

Note: • If the frequency you want to store exists already,

WARNING

appears on the display and you will hear

a beep. (See Duplicate Frequency Alert on page 27.)

• After storing the frequency, it moves to the Search

Hold mode.

• In case there is a not free channel, the frequency

you want to store will automatically be stored in the
previous channel before you entered into Chain
search mode. 

4. To store another frequency, select another channel for the

new frequency by rotating the VFO.

5. Repeat steps 1, 2 and 3 after starting the search for all the

Search Frequencies you want to store.

The scanner automatically stores searched frequencies if its
auto store feature is activated.
But the frequency already stored can not be stored.
To make use of this feature, set a search range first (see
page 37), then enter into the menu mode. If you start this
feature without setting a search range, 

NO  LIMIT  DATA

appears on the display.

1. Press MENU/BACK.

2. Select 

SERVICE OPTION

- 

CHAIN  SEARCH

-

AUTO STORE 

by rotating the VFO and pressing E.

3. Set to 

ON

by rotating the VFO and

pressing E.

4. Select the bank number you want to

use with the keypad. The selected
bank number appears on the display.

Note: If the selected bank has no free

channels to store, 

CH  DATA

FULL

will appear on the display

40

AUTO STORE
SELECT BANK
12--56----

AUTO STORE
ERROR
CH DATA FULL

SRCH   12.5k
1240.0000 NFM
Range 1
25cm Amateur Grp 

BC250D  9/20/2 2:52 PM  Page 40