Uniden America Corporation UB315 사용자 설명서

45

is active, you can change the search direction to up
or down.

During the search of one of the preprogrammed services, the
lowest display line will indicate the service that you are
searching. To stop the search, press HOLD/MAN. Rotate the
VFO to move up or down one programmed frequency when
the 

FREQ

icon is displayed, or press RSM to resume

searching.

You can set the scanner to skip the frequencies unwanted
during Service Search. 100 skipped frequencies are
programmable.

1. To skip over a frequency, press L/O when stopping at the

frequency you want to skip.

2. To cancel a skip during search, press

HOLD/MAN, tune in the desired
frequency by rotating the VFO, then
press L/O.

To restore all skipped frequencies, press and hold L/O for
2 seconds.

Note: You can not set any skip frequency in 

WEATHER

service mode.

In addition to the conventional weather broadcasts, your
BC250D is compatible with NWR-SAME weather alert. 
When the scanner receives NOAA’s Specific Area Message
Encoding (SAME) coded weather emergency signal, it sounds
the alert siren with a specified message. You must program
your FIPS code to identify the Specific Area where you are
located.

1. Press MENU/BACK.

2. Select 

SERVICE  OPTION

- 

WEATHER

- 

ALERT

by

rotating the VFO and pressing E.

3. Set to 

ON

by rotating the VFO and

pressing E. 

WX ALERT ON

displays.

4. When the unit receives a warning signal, it shows a

message with the alert siren defined. (For NWR-SAME
EVENT CODE, see the table in the Appendix.)

5. To deactivate, just press any key or it is automatically

canceled and the alert siren stops.

SRVC      15CH   
 453.6000 NFM
SERVICE SEARCH
PUBLIC SAFETY

SRVC       2CH
 162.6000  FM
SERVICE SEARCH
WX ALERT ON

BC250D  9/20/2 2:52 PM  Page 45