Uniden America Corporation UB315 사용자 설명서

61

EDACS or Motorola Type 1

Enter 

(decimal key) followed by the Unit ID digits,

then SCAN.

Motorola Type 2
Enter 7 followed by the Unit ID digits, then E.

HINT - There is a special code to let you receive all I-Call

IDs with a single Scan Lists entry.
Simply enter 

(decimal key), 0, SCAN. This will

store the special code 

i0

in an EDACS Scan Lists,

or 

700000

in a Motorola Scan Lists or Digital.

Then, whenever you SCAN this entry, or select it in
HOLD mode, the scanner will receive any active I-
Calls, regardless of the Unit IDs.

Note: Motorola I-CALL tracking performance may vary

between systems.

The BC250D allows you to track more than one system at a
time. Here are some highlights of this feature:

❖

You can actually track up to 10 trunking systems at
one time.

❖

You can trunk, scan, or search and scan conventional
frequencies at the same time.

❖

You can program conventional frequencies in the same
bank as trunking systems.
After the scanner finishes checking a trunked system
for activity, it will conventionally scan the other
frequencies in the bank (remember, only trunking
frequencies are programmed in TRUNK mode).

To scan a mix of trunking and conventional banks, select the
banks you wish to be active with trunking Off, then press
TRUNK. The scanner will instantly begin scanning. If you
have not programmed a trunking bank with talkgroup ID’s, you
will receive 

NO ID (----)

message for that bank. 

You can switch to SEARCH mode and the scanner will search
for any active ID’s on the system.

When more than one trunk system is active (for example two
or more trunked systems or a trunked system and one or
more conventional frequencies), the radio jumps between
systems/frequencies as follows:

TRUNK SCAN: The scanner moves to a trunked system
and looks for IDs in your Scan List(s) for up to 1 second. If
it finds no activity on your programmed talkgroups, it

BC250D  9/20/2 2:52 PM  Page 61