Uniden America Corporation UB315 사용자 설명서

To properly track Motorola VHF and UHF trunked systems
you must enter what is known as the base, the spacing
frequencies and offset channels for each system.

To find these out, check the www.trunktracker.com or
www.bearcat1.com/free.htm and other web sites and
frequency resources.

To enter the Base, Spacing Frequencies and Offset Channel:
(You can set up to three sets of these, but almost all systems
only use one set)

1. Press MENU/BACK.

2. Select 

SCAN OPTION

-

TRUNK

by rotating the VFO and

pressing E.

3. Select the bank number by rotating the VFO and pressing

E.

4. Select 

TRUNK  TYPE-TYPE  2  UHF

or 

TYPE 2

VHF

by rotating the VFO and pressing E.

5. Select 

BASE CONFIG

from 1 - 3 by

rotating the VFO and pressing E.

6. Enter a new Base Frequency with the

keypad.

7. Press E.

The display changes for entering the
Spacing Frequency.

8. Enter a new Spacing Frequency with

the keypad.

Note: You can only enter within a range of 5-100 kHz, and 

5 or 7.5 or 12.5 kHz multiples.

9. Press E.

The display changes for entering the Offset Channel.

10. Enter a new Offset Channel with the

keypad.

Note: You can only input within a range

of 380-759.

11. Press E.

The display changes for entering the next Base
Frequency.

12. To exit from this mode, press MENU/BACK repeatedly.

71

          M
  406.0000
ENTER FREQUENCY
BASE FREQUENCY 1

          M
   50.0
ENTER FREQUENCY
SPACE FREQUENCY1

          M
 CH 380
ENTER CHANNEL
OFFSET CHANNEL1

BC250D  9/20/2 2:52 PM  Page 71