Sharp Corporation DMR0171 사용자 설명서

O T H E R   C O N V E N I E N T   F E A T U R E S

There are 3 patterns in Super Steam Convection and
Convection which can be programmed into Multiple
Sequence Cooking.
1 Preheat + Bake or Roast (Convection) + Bake or

Roast (Convection)

2 Preheat + Roast (Super Steam Convection) + Bake

or Roast (Convection)

3 Preheat + Convenience Foods (Super Steam

Convection) + Bake or Roast (Convection)

• Preheat can be omitted.

* Suppose you want to cook in Sequence Cooking with

Preheating in patterns 2.
1st stage is at a temperature of 375°F for 1 hour and
10 minutes.
2nd stage is at a temperature of 400°F for 10 minutes.

P R O C E D U R E

Press Convection to
program the second stage.

For 1st stage, follow the steps 1 to 5 in single
SuperSteam Convection. See SuperSteam
Roast on page 27.

Turn the Dial to enter
the desired temperature
400°F and press Enter.

Turn the Dial to enter the
desired cooking time 10
minutes.

Press START .

Your oven can be programmed for up to 4 automatic
cooking sequences, switching from one power level
setting to another automatically. Sometimes cooking
directions tell you to start on one power level and then
change to a different power level.

• Suppose you want to cook for 5 minutes at 30% and

then continue to cook for 30 minutes at 50%.

P R O C E D U R E

Press Microwave to
program the second stage.

For 1st stage, follow the steps 1 to 3 in
manual microwave cooking under To Set
Power Level, page 32.

Turn the Dial to enter
cooking time 30 minutes
and press Enter to
proceed.

Turn the Dial to select
power level 50%.

Press START.

SEC AX1200 O/M,P31-

08.10.27, 6:12 PM

34