Nokia of America Corporation BBTRX-14 사용자 설명서

9763 MCI daisy chain requirements

Overview

Two 9763 MCI can be daisy chained together to share the same backhaul port, reducing
the investment cost needed to connect individual 9763 MCI to the backhaul network and
aggregating the uplink traffic. The daisy chain link between two 9763 MCI can be the
same as the backhaul link (either electrical or optical) or a mixed link configuration is
possible as shown in the following deployment scenario's.

Note: Physically the backhaul SFP port BH1 is on top of daisy chain SFP port BH2.

Electrical link for backhaul and daisy chain

The following shows the deployment scenario for electrical backhaul and daisy chaining.
For daisy chaining to another 9763 MCI and additional cable and SFP are required.

BH1SFP port

(front)

BH2 SFP port

(back)

Figure 3-3 Electrical backhaul and daisy chain configuration

BH1 BH2

9763 MCI 2x250mW

Electrical cable to

Backhaul system

Backhaul

system

10/100/1000Base-T

SFP

9763 MCI 2x250mW

Electrical

daisy chain cable

10/100/1000Base-T

SFP

9763 MCI installation
9763 MCI pre-installation

9763 MCI daisy chain requirements

....................................................................................................................................................................................................................................

3-6

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

Alcatel-Lucent 9763 MCI

3MN-MCI-IMOP

Issue 1

December 2013