JVC KENWOOD Corporation K9T002 사용자 설명서
8
Before use
(continued)
We can accept no liability for any
problems arising as a result of the use of media using
materials other than those specified.
materials other than those specified.
Card material
ISO/IEC 7810 type ID1 (dimensions) :
equivalent product
ISO/IEC 7811-2 (Magnetic stripe) :
equivalent product
ISO/IEC 7816 (IC card) :
equivalent product
The materials of some cards may not be suitable for
printing. Consult your dealer regarding the materials to
be used and specifications required before purchase.
printing. Consult your dealer regarding the materials to
be used and specifications required before purchase.
Do not place objects on top
20cm or more
7.9 inches or more
20cm or more
7.9 inches or more
Installation
The performance of the card printer is strongly
influenced by the installation location. Do not install in
the following kinds of location:
influenced by the installation location. Do not install in
the following kinds of location:
• Dusty locations
Use the card printer in the locations with the cleanness
Class 8 or better of ISO14611-1. Using the card printer
in dusty locations may cause print blurrings and printing
head malfunctions. And turn the power off whenever
printing opration is not required. The state of power-on
kept for a long time without printing operation may
collect fine dust inside the printer, causing print
blurrings and dust adherence.
Class 8 or better of ISO14611-1. Using the card printer
in dusty locations may cause print blurrings and printing
head malfunctions. And turn the power off whenever
printing opration is not required. The state of power-on
kept for a long time without printing operation may
collect fine dust inside the printer, causing print
blurrings and dust adherence.
• Locations susceptible to strong vibration or shock
• Locations exposed to direct sunlight
• Locations where there is a possibility of metal objects
• Locations exposed to direct sunlight
• Locations where there is a possibility of metal objects
and other foreign material entering the unit
• Areas near walls with little ventilation
• Unstable locations and angled surfaces
• Locations prone to static electricity, such as a carpeted
• Unstable locations and angled surfaces
• Locations prone to static electricity, such as a carpeted
room
• Areas near air conditioners, humidifiers, stoves, etc.
that may cause condensation within the printer
The printer is to be installed in an environment with the
following temperature and humidity.
following temperature and humidity.
Temperature : 15
°
C to 30
°
C
59
°
F to 86
°
F
Humidity
: 35% to 70%
Use of the printer in an environment
with temperatures lower than the above range may cause
retransfer errors and use of the printer in an environment
with temperatures higher than the above range may
cause print errors from deformation of the cards and
wrinkling of the film.
retransfer errors and use of the printer in an environment
with temperatures higher than the above range may
cause print errors from deformation of the cards and
wrinkling of the film.
Installation diagram
Ventilation holes are provided for the cooling fan on the
bottom and sides of the unit. Avoid inserting any object
into the gap between the bottom of the unit and the top
of the stand. Install the unit with its sides kept away from
the surrounding wall as illustrated in the diagram, and
keep the back of the unit at least 10cm away from the
wall. Also, do not place any object on top of the unit.
bottom and sides of the unit. Avoid inserting any object
into the gap between the bottom of the unit and the top
of the stand. Install the unit with its sides kept away from
the surrounding wall as illustrated in the diagram, and
keep the back of the unit at least 10cm away from the
wall. Also, do not place any object on top of the unit.
CAUTION
CAUTION
Version upgrade
The following defects may occur as a result of the ver
sion upgrade for the firmware of the printer, the printer
driver.
•
The operation of the printer or application software be-
comes unstable.
•
Defects in print result occurs.
•
Print color or shade differs.
•
The performance of reproducing fine letters, changes.
•
Others
Be sure to retain a copy of the current version when
performing version upgrade. Reinstall the previous ver
sion immediately if these problems occur. We are not
liable for any damage such as defective cards or inter
ruptions during printing as a result of the version up
grade.
Escape Clause
We do not provide compensation for any malfunction
during card printing caused by breakdown of the
machine, ink ribbon defects or card characteristics.
In addition, we also do not provide compensation for
insufficient print quality, which are not agreed in
advance. Please evaluate carefully beforehand.
Card Material
Some card material may not be suitable for printing.
Using a contact-type IC card other than those specified
by the dealer, may cause damage to the thermal head.
No compensation is made for the life reduction and
failures that were caused by unsuitable card material.
Warp of card or uneven thickness of IC cards, even
though they are within the tolerance of JIS or ISO
standards, may not be suitable for printing or feeding.
For details on the specifications about card material
or others, consult the dealer in advance