E F Johnson Company 2424140 사용자 설명서

25

Selecting a Priority Scan List

Conventional Channels - Conventional systems are 
programmed with a default scan list that is normally 
selected by all channels in that system. However, there 
is a programmable option to slave a particular conven-
tional scan list to a zone. This then becomes the 
default list for all conventional channels in that zone 
(it overrides the system programming). This slave 
feature is programmed on the Edit Zone screen. 

If the Scan (List) Select option switch or menu param-
eter is programmed, the default list selected by all 
conventional channels (even those belonging to slaved 
zones) is temporarily changed. The preceding default 
scan lists are automatically reselected whenever radio 
power is cycled.

SMARTNET/SmartZone and Project 25 Trunked 
Channels - Each channel (talk group) can be 
programmed so that one of the programmed lists is 
selected or scanning is disabled (No List). In addition, 
channels can be programmed so that scanning is auto-
matically enabled (Auto Scan) when they are selected. 

If the Scan (List) Select option switch or menu param-
eter is programmed, the list that is selected by all talk 
and announcement groups in the current system can be 
temporarily changed by the user as follows. “No List” 
(scanning disabled) or “Programmed” (default list) can 
also be selected if desired. The programmed default 
scan list is automatically reselected on power up. 

To change the currently selected scan list (all 

channel types), proceed as follows: 

1. With scanning disabled (

 icon not displayed), 

press the Scan List option switch or select the Scan 
Selct menu parameter.

2. The currently selected list is displayed as “List x”, 

where “x” is the currently selected list. To exit 
without changing the selected list, simply press the 
Scan List option switch again or the F1 key.

3. To select another list, press the Up/Down switch. 

When the desired list is displayed, select it and exit 

this mode by pressing the Scan List option switch 
again or the F1 or F2 key.

Editing a Priority Scan List

If the Scan Edit option switch or menu parameter 

is programmed, conventional, SMARTNET/
SmartZone, and P25 Trunked priority (standard) scan 
lists can be user programmed. Changes are permanent 
(cycling power does not reselect a default condition). 
Proceed as follows:

1. Make sure that both priority and radio wide scan-

ning are off (

 icon not displayed). Select a 

conventional or SMARTNET/SmartZone/P25 
Trunked channel corresponding to the scan list 
being programmed.

2. Select the scan edit mode using the Scan Edit option 

switch or menu parameter. This mode is indicated 
by 

 in the display. 

3. If applicable, select the list to be edited by pressing 

the Up/Down switch. Select the desired list by 
pressing the F2 key. The selected list is indicated as 
“LIST x”. If user programming is disabled on a list, 
(conventional only) “NO EDIT” is momentarily 
displayed and it cannot be edited.

4. Select the channel you want to add or delete by 

pressing the Up/Down switch. After the last channel 
in the current zone is displayed, the first valid 
channel in the next zone is displayed and vice versa. 
Lists are limited to 512. If an attempt is made to add 
more than 512, “LIST FULL” is displayed and a 
channel must be deleted before another can be 
added. 

5. If the selected channel is in the scan list (scanned), 

the 

 icon is displayed. To change the status of 

the displayed channel, press the F2 (Enter) switch. 

With conventional channels only, if the selected 
scan list is programmed with fixed priority 
channel(s), the next press of F2 makes the current 
channel the priority channel indicated by 

. If 

dual priority channels are used, pressing F2 again 
makes it the second priority channel indicated by