E F Johnson Company 2425770 사용자 설명서

Viking Portable 600 Radio Operating Manual

5-25

To recall from a list:

1 Select the conventional channel that is programmed to select the desired access and de-

access codes.

2 Momentarily press the Phone option button or select the Phone > Num List menu 

parameter. The display indicates the last number dialed by alternately displaying “Last 
Num” and the telephone number. In addition, the phone mode is indicated by the 

 

icon.

3 If required, press the Up/Down buttons to display the desired number. The alias and 

telephone number are alternately displayed. 

4 Briefly press the PTT switch to send the access code. A dial tone sound should then be 

heard. Briefly press the PTT switch again to send the digits. Proceed to Step 5.

To make a direct entry using DTMF keypad:

1 Select the conventional channel that is programmed to select the desired access and de-

access codes.

2 Press and hold the Phone option button until a tone sounds or select the Phone > Enter 

Num menu parameter. The alias of the last called telephone number is displayed if it is 
in the phone number list. Otherwise, only the last eight digits are displayed. In addition, 
the phone mode is indicated by the 

 icon.

3 Enter the telephone number using the 0-9, 

*

, and # keys. To enter a pause (indicated by 

“P”), press 

*

 #. The number scrolls to the left in the display so that the eight right-most 

digits are always displayed. Numbers up to sixteen digits (including pauses) can be 
entered.

4 Briefly press the PTT switch to send the access code. A dial tone sound then be heard. 

Briefly press the PTT switch again to send the digits.

5 Press the PTT switch to talk and release it to listen. Since the radio operates half 

duplex, it is not possible to talk and listen at the same time.

6 When the telephone call is finished or if it could not be completed for some reason, end 

it by pressing the Phone option button or <F1> button. This sends the de-access code 
which tells the system that the call is finished and that the repeater can be released.

1 When a telephone call is received, “ringing” similar to a standard telephone is heard 

and “Phone” is displayed.

2 To answer the call, press the Phone option button or select that menu parameter and 

press the PTT switch to talk and release it to listen.