E F Johnson Company 2425795 사용자 설명서
Viking™ VP600 Portable Radio Operating Manual
4-15
Radio-wide Features
Right button again takes the channel out of the scan list. Refer to Sections 5.10.3 and
6.10.1 for more information on priority channel sampling.
6.10.1 for more information on priority channel sampling.
6 To exit this mode and save the changes, press the
(Menu) button.
4.11.5.2
Radio Wide Scan Lists
With radio wide scanning, up to 255 scan lists can be programmed. This list is user
programmable, and can contain up to 255 channels of any type. More information on
selecting and editing radio wide scan lists follows.
programmable, and can contain up to 255 channels of any type. More information on
selecting and editing radio wide scan lists follows.
Each scan list can be selected as User Editable. With this option selected, the user can edit
the active scan list only from their radio. The user can also select which scan list is active
through a programmed function button or menu function selection. This active scan list is
retained through power down.
the active scan list only from their radio. The user can also select which scan list is active
through a programmed function button or menu function selection. This active scan list is
retained through power down.
4.11.5.2.1
Determining Channels in Radio Wide Scan List
The channels in radio wide scan lists are determined by selecting the scan list edit mode
(see “Editing Radio Wide Scan List” which follows). When the displayed channel is in the
radio wide scan list (scanned normally), the
(see “Editing Radio Wide Scan List” which follows). When the displayed channel is in the
radio wide scan list (scanned normally), the
icon is displayed.
4.11.5.2.2
Editing a Radio Wide Scan List
If the RWS Edit option button or menu parameter is programmed, the radio wide scan list
can be edited. Changes are permanent (cycling power does not reselect a default
condition). Proceed as follows:
can be edited. Changes are permanent (cycling power does not reselect a default
condition). Proceed as follows:
1 Make sure that both priority and radio wide scanning are off (
or not displayed).
Select the scan edit mode using the RWS Edit option button or menu parameter. This
mode is indicated by the
mode is indicated by the
(Radio Wide Scan) and
(Edit) icons in the display.
2 Select the channel you want to add or delete by pressing the Left/Right buttons. After
the last channel in the current zone is displayed, the first valid channel in the next zone
is displayed and vice versa. The list is limited to 255 channels. If an attempt is made to
add more than 255, “List Full” is displayed and a channel must be deleted before
another can be added.
is displayed and vice versa. The list is limited to 255 channels. If an attempt is made to
add more than 255, “List Full” is displayed and a channel must be deleted before
another can be added.
3 If the selected channel is in the scan list (scanned), the icon is displayed. To change
the status of the displayed channel, press the Left or Right button.
4 To exit this mode and save the changes, press the
(Menu) button.