E F Johnson Company 2425M80 사용자 설명서

Draft 02 - Sep 1 2015

9-4

ATTACH_GPS

“Attach GPS”
“ATTACH GPS”
“Attach GPS”

This error indicates that the user has tried to enter GPS mode 

without attaching the GPS receiver to the radio.

AUTHENTICATION_FAILED

“Auth Failed”
“AUTH FAILD”
“Authent Failed”

This error indicates the radio failed P25 Trunking 

Authentication, which occurs during Unit Registration on 

supported systems.

BAD_BAND

“Bad Band”
“BAD BAND”
“Bad Band”

The radio band in the parameter file does not match the radio 

band in the tuning parameters. You will see this message if a 

parameter file for the wrong band is downloaded to the radio. 

This error is also indicated with 4 orange blinks of the LED. 

BAD_ESN

“Bad ESN”
“BAD ESN”
“Bad ESN”

This error indicates that the ESN of the radio is not valid. This 

error is usually only seen in the factory when first 

programming brand new logic boards. This error is also 

indicated with 12 orange blinks of the LED.

BAD_FILE_FORMAT

“Bad File Fmt”
“BAD FF”
“Bad File Format”

The parameter file has a newer file format version than what 

matches the software in the radio. This error is indicated with 

2 orange blinks of the LED. 

BUSY

“Busy”
“BUSY”
“Busy”

This error indicates that a call has been attempted and the 

system has responded that no channels are available for 

assignment.

BUSY_TIMEOUT

“Busy Timeout”
“BUSY TMOUT”
“Busy Timeout”

This error indicates that the radio previously received a busy 

response from the system and it has not received a channel 

grant before the busy timeout timer has expired.

CLEAR_ONLY

“Clear Only”
“CLEAR ONLY”
“Clear Only”

This error indicates that the selected channel or group is 

strapped clear only and that a secure call cannot be made.

COLD_BATTERY

“Cold Battery”
N/A
N/A

The portable’s battery has dropped below the “cold” 

temperature threshold. Transmit is not allowed in this 

condition.

CONTROL_HEAD_CONFLICT

N/A
“CH ADDRESS  

CONFLICT”
“CH ADDRESS 

CONFLICT”

There are two control heads connected to the mobile that are 

assigned the same address.

CORRUPT_PARMS

“Corrupt Parm”
“CORPT PARM”
“Corrupt Parm”

The parameters checksum or other data is corrupted. This 

error will also be indicated with 5 orange blinks of the LED. 

CYCLE_POWER

“Cycle Power”
“CYCLE POWR”
“Cycle Power”

There is a communication failure between the DSP and the 

back end ADC on the RF deck. This error will also be 

indicated with 8 orange blinks of the LED. 

DATA_DENIED

“Data Denied”
“DATA DENY”
“Data Denied”

The Radio received a “Deny” response when trying to acquire 

packet data service.